Hi could anyone help me with this maps. It is my first map finding and i'm not sure if i'm rith
thanks

sorry but idon't know how to upload my ori
i will try to do by an external link

here is some maps founded im not sure if it is correct
6A9D2 (16x16) Advance injection time (RPM x IQ = Injection angle BTDC)
7A9D2 (16x16) Advance injection time (RPM x IQ = Injection angle BTDC)
67328 (10x16) Boost Pressure (Throttle Position x RPM = Boost)
674A4 (10x16) Boost Pressure (Throttle Position X RPM = Boost)
77328 (10x16) Boost Pressure (Throttle Position X RPM = Boost)
774A4 (10x16) Boost Pressure (Throttle Position X RPM = Boost)
68564 (6x8) Drivers Wish (Throttle Position X RPM = IQ)
685E8 (6x8) Drivers Wish (Throttle Position X RPM = IQ)
78564 (6x8) Drivers Wish (Throttle Position X RPM = IQ)
785E8 (6X8) Drivers Wish (Throttle Position X RPM = IQ)
61E3E (16x16) EGR (Can't Figure Out Axes)
71E3E (16x16) EGR (Can't Figure Out Axes)
6236A (20x16) Injection Duration (IQ x Rail Pressure = Duration in milliseconds)
6AE22 (20x16) Injection Duration (IQ x Rail Pressure = Duration in Milliseconds)
7236A (20x16) Injection Duration (IQ x Rail Pressure = Duration in Milliseconds)
7AE22 (20x16) Injection Duration (IQ x Rail Pressure = Duration in Milliseconds)
6698E (10x16) I believe this to be an N75 Map? (unknown axes)
66BD8 (10x16) as above
7698E (10x16) as above
76BD8 (10x16) as above.
6B19A (16x14 OR 16x13??) Pre Injection Quantity (X x Y = pre injection IQ in mg/r)
7B19A as above.
6ABD2 (16x16) Preinjection time (RPM x IQ = Preinjection degrees BTDC)
7ABD2 (16x16) Preinjection time (RPM x IQ = Preinjection degrees BTDC)
69288 (16x16) Rail Pressure (Throttle position x RPM = rail pressure in Bar)
79288 (16x16) Rail Pressure (Throttle Position x RPM = rail pressure in Bar)
69656 (17x9) Rail Pressure Limiter (X x Y = Rail Pressure in Bar) One of these limiters isn't selected correctly...
79666 (17x8) Rail Pressure Limiter (X x Y = Rail Pressure in Bar)
67DB4 (16x16) Smoke Map (RPM x Air flow (don't know the unit!!) = IQ)
77DB4 (16x16) Smoke Map (RPM x Air flow = IQ)
67D46 (19x1) Torque Limiter (RPM limits IQ)
77D46 (19x1) Torque Limiter (RPM limits IQ)
67144 (10x10) Atmospheric Correction (X x Y = Z)
77144 (10x10) Atmospheric Correction (X x Y = Z)

Hey, some missing maps:
62782 injection start (IQ x rpm = BTDC)
63810 boost limit by temperature( boost x temp )
66742 boost limit ( rpm x temp = boost limit)
6698E,66BD8 VNT maps ( IQ x rpm = VNT duty)
67144 boost limit by atmospheric pressure ( IQ x atm pressure)
678CA, 6792E two important IQ limit by temperature maps ( temp x rpm = IQ limit)
679DE starting IQ
690C8 Rail precontrol valve map( rail pressure x rpm = valve duty)
Maps in 7XXXX analogy.
Axises for SOI and rail maps are on the area 610XX, IQ axis up to 5500, rpm up to 4500. Every IQ including IQ in Smoke map is in mm3.
To calculate AFR in SMoke map You must convert it into mg( factor 0.083). Egr map axises are IQ up to 40 mm3 x rpm up to 2800. In boost pressure and rail pressure axis there isnt throttle position but IQ. Rail limiter is 8x16 map. I think in 2.0 HDI 90 cv there is not electronic boost control so you dont need to change boost releted maps.
Greetings. If You need more help write it into the topic.

Hi!
Is there really a vnt table at 6698E,66BD8 VNT maps ( IQ x rpm = VNT duty) in your file?
My HDI 90 has a wastegate turbo. So i wonder if a VNT upgrade is possible with this file.

Yes

you need to locate the boost strategy switch to enable vnt control

thanks all for the information

manekin13 wrote:Hey, some missing maps:
62782 injection start (IQ x rpm = BTDC)

I cant find this map. Did you help?