I want to put a pd150 turbo and pd150 injectors on my 1.9 tdi brs engine am i able to get a map written without having it put on the rolling road as I want to swap the box in a few months 6 speed then get a rolling road remap to get max torque and bhp
will the engine start and drive on the current 105 map when the larger inj and turbo are added

Even if enginie start it wont work properly.
You have to get SOI, duration, boost, N75 maps from ARL and all related limiters.
Then you have tune DW, NmToIq, torque limiter maps, you cant just paste this part from one file to another, because EDC15 is mg based and EDC16 Nm.

so I will have to get it on a rolling road straight away not bale to run a static map file onto the ecu or get a experienced mapper to write me a file
I need to bed in the new cam with running in oil so hopefully it will start I had a some feedback from a member on another forum who said he was able to start and drive his with the same set up

what is EDC15 is mg based and EDC16 Nm are these different ecu from different cars models

Both engines has different ECU. EDC15 has driver's whish map in mg (injection quantity) and EDC16 in Nm (torque).
Converted file can be done even without dyno testing but its worth to make log files to test that everything is ok.

ok thanks kind of makes sense will i need to take the van to the person mapping or can it be done through file transfer online any suggestions please on someone who can help me with this