Chip Tuning Tools

by **ECUTools** » Mon Aug 24, 2020 4:01 pm

⭐ ECUTools are more reachable than ever before! ⭐

We have expanded our field of reach and are now available to contact on the new platforms:

☑️ Viber: check here!
☑️ WhatsApp: check here!
☑️ Twitter: https://twitter.com/ECUToolsEU

by **ECUTools** » Thu Aug 27, 2020 1:50 pm

❗️❗️ KESSv2: remap via OBD of the ECU ACDelco E78 Gen II, E80 Gen II, E82, E92! ❗️❗️

This update involves the E78 Gen II, E80 Gen II, E82, E92 ECUS produced by ACDelco, that equip hundreds of vehicles of the GM group.

⭐️It allows you to read and write via OBD for:⭐️

BUICK
CADILLAC
CHEVROLET
GMC
HOLDEN
OPEL

✅The list of all supported vehicles can be found here: https://www.alientech-news.com/en/k-suite-4-00/

You can work in boot – ❗️with K-TAG❗️ – offering both a repairing and a calibration service.
Or you can work in OBD – ❗️with KESSv2❗️ – simplifying and speeding up some steps significantly and intervening in the operating parameters of the engine: power increase or reduce consumption.

☑️ https://ecutools.eu/chip-tuning/aliente ... ii-master/
☑️ https://ecutools.eu/chip-tuning/aliente ... -ii-slave/

by **ECUTools** » Fri Aug 28, 2020 12:20 pm

We're even closer now!

⚡ ECUtools now have accounts in Instagram and WeChat! ⚡

⭐️ Instagram: https://www.instagram.com/ecutools.eu
⭐️ WeChat: wxid_0g7gf5h8qs8r12

by **ECUTools** » Fri Aug 28, 2020 3:32 pm

❗️Autotuner is now able to Bench Read and Bench Write on the following engines:

✅ Mercedes 3.0T : Bosch MED17.7.3.1
✅ Jaguar - Land Rover group: Bosch EDC17CP42

⭐️ https://ecutools.eu/chip-tuning/autotuner-tool-master/
⭐️ https://ecutools.eu/chip-tuning/autotuner-tool-slave/

by **ECUTools** » Tue Sep 01, 2020 9:25 am

> ❗ BitBox/BitEdit SALE ❗ <

⭐ September 1st - 12th ❗12% OFF❗ ALL modules ⭐

Use the promo code ⚡ bitsale12 ⚡ to get this 12% discount.

☑️ http://ecutools.eu/chip-tuning/bitbox/
☑️ http://ecutools.eu/chip-tuning/bitedit/

by **ECUTools** » Wed Sep 02, 2020 3:09 pm

⭐️❗️New OBD&BOOT solutions for Magneti Marelli 10GF and ZF AL552❗️⭐️

New OBD and BOOT solutions for programming Magneti Marelli 10GF ECUs and ZF AL552 automatic transmissions.

✅ With FLEX version 5.1.0.0
✅ OBD and BOOT protocols for working on vehicles such as Audi Q7 – 4M (MY2016) 3.0 TDI E-tron and Audi RS7 (MY2019) 4.0 TFSI
✅ New solutions for programming Magneti Marelli 10GF ECUs fitted on FCA car group, as well as Fiat Argo X6H (MY2018) 1000 FlexPower

New protocols added:

☑️ Volkswagen BOSCH EDC17U05 OBD: Read / Write / Checksum Calculation Maps – Write Update
☑️ Volkswagen BOSCH EDC17U01 OBD: Read / Write / Checksum Calculation Maps- Write Update
☑️ Porsche CONTINENTAL SDI9 BOOT: Read / Write / Checksum Calculation Internal Flash, Read / Write External Eeprom
☑️ FAL Marelli 10GF BOOT: Read / Write / Checksum Calculation Internal Flash, Read / Write External Eeprom
☑️ AUDI ZF AL552 OBD: Read / Write / Checksum Calculation Maps – Write Update
☑️ Volkswagen ZF AL552 OBD: Read / Write / Checksum Calculation Maps – Write Update
☑️ Bentley ZF AL552 OBD: Read / Write / Checksum Calculation Maps – Write Update
☑️ Porsche ZF AL552 OBD: Read / Write / Checksum Calculation Maps – Write Update
☑️ FORD EMS2204 BOOT: Read / Write / Checksum Calculation Internal Flash, Read / Write Internal Eeprom
☑️ FORD EMS2207 BOOT: Read / Write / Checksum Calculation Internal Flash, Read / Write Internal Eeprom
☑️ FORD EMS2211 BOOT: Read / Write / Checksum Calculation Internal Flash, Read / Write Internal Eeprom
☑️ FORD DCU201 BOOT: Read / Write / Checksum Calculation Internal Flash
☑️ FORD SID802 BOOT: Read / Write / Checksum Calculation Internal Flash

✅ Improved autodetection for TP2.0 and UDS VAG BOSCH MEDC17 ECUs

Full list of all supported vehicles

⚡ FLEX Master
⚡ FLEX Slave

by **ECUTools** » Thu Sep 03, 2020 3:57 pm

❗️ Bosch MG1CS011 TC277 Read & Write with K-TAG! ❗️

This K-TAG update introduces reading and writing in Service Mode of the MG1CS011 ECU produced by Bosch, installed on the most popular vehicles of the VAG group, in production since 2018.

The list of vehicles includes:
☑️ Audi
☑️ Seat
☑️ Skoda
☑️ Volkswagen

❗️For full vehicle list please check here!

✅ No ECU opening required
✅ Fast
✅ A significant decrease in the margin of error

⚡ K-Tag Master
⚡ K-Tag Slave

by **ECUTools** » Tue Sep 08, 2020 2:47 pm

❗️Autotuner for VAG 1.8 TSI / TFSI & 2.0 TSI / TFSI❗️

⚡ Autotuner is now able to perform the following operations: ⚡

✅ Bench Read
✅ Bench Write

On the following engines:

VAG 1.8 TSI/TFSI 170
VAG 1.8 TSI/TFSI 177
VAG 1.8 TSI/TFSI 180
VAG 1.8 TSI/TFSI 190
VAG 2.0 TFSI 225
VAG 2.0 TSI 300

Autotuner Master
Autotuner Slave

by **ECUTools** » Wed Sep 09, 2020 3:21 pm

❗️ The 2012-2017 Mercedes G63 AMG is now supported with HP Tuners software.

✅ Licensing cost is 6 credits and an MPVI2 is required.

> HP tuners MPVI 2

by **ECUTools** » Fri Sep 11, 2020 3:08 pm

❗️New modules for CombiLoader❗️

⚡ Delphi MT22.x and ⚡ Continental DC4 TCM + ⚡ Continental TA2005 TCM

Along with some updates:

☑️ Bosch M(E)7.9.7 - now supports more software versions;
☑️ Delphi MT92 Great Wall - supports MT92.1 Changan ECU;
☑️ Ford Siemens 2 version 1.1 - supports SIM-21;
☑️ SID208 PSA - has better compatibility with J2534 devices;
☑️ SID807 PSA - added reading of ECU calibrations;
☑️ SIM271DE 2.0 MercedesBenz - better ECU writing.

⭐️ Delphi MT22.x
⭐️ Continental DC4 TCM + Continental TA2005 TCM