EDC16C31 1037396107 XDF

by **M3r71n0** » Thu Aug 23, 2012 5:49 pm

IQ Torque Limiter - Gear 1.2.3.4.5.6.R? Right?

In the original map not is 90mg/str, but 900Nm?

Also, I want to thank you very much for the excellent work you are doing.

Tanks, tanks, tanks.

by **Relic** » Thu Aug 23, 2012 7:33 pm

Correct factor is 0.1 and unit is NM for gears 1,2,3,4,5,6,R
Not factor 0.01 and unit mg/str.
;)

They are all set at 900nm
They are not IQ TLs they are proper NM TLs
6nm = 1mg in the NM>IQ conversion tables.
So 900nm = 150mg fuel

by **M3r71n0** » Thu Aug 23, 2012 10:05 pm

TLs?

What is the NM/IQ convertion table?

by **M3r71n0** » Fri Aug 24, 2012 1:23 am

Autorespond :D

TLs=Tables

by **Relic** » Fri Aug 24, 2012 10:08 am

TL = Torque Limiter.
Torque Calibration tables = NM>IQ
RPM vs NM = IQ (16x16)
There are 3 identical in my map.

No point telling the ECU what NM you want if it doenst know how much IQ = NM ;)

by **M3r71n0** » Fri Aug 24, 2012 2:13 pm

OK 60:10=6:1 :D

In the IMRC Duty the real value max is 7782. the conversion fact is 0,012207, then the % duty is 95. In xdf table, the factor is
(-0,012207) + 100. Becaus?

In the IMRC Flap Engle the conversion fact is 0.01. The degrees fact not is 0.0234381139?

by **Relic** » Fri Aug 24, 2012 3:39 pm

To invert the values....
95% ECU = 5% HDS

You are not using crankshaft degrees ;)
So you are not using 0.023437

by **M3r71n0** » Fri Aug 24, 2012 7:04 pm

If you run in Italy for holidays, you have one coffee paid ;)

by **Relic** » Fri Aug 24, 2012 9:46 pm

Only one :cry:
...no donut ?
:lol:

by **M3r71n0** » Mon Aug 27, 2012 5:25 pm

Antipasto all'italiana (con "prosciutto di parma", formaggio "parmiggiano reggiano" e "salame napoletano")
"Linguine agli scogli"
"Arrosto di gamberoni"
"Formaggio sardo e mozzarella di bufala"
"Babbà alla napoletana"
"Caffè Borbone"
"Amaro Lucano"

Vino "Falanghina" a volontà

OK?! 8-)
Sorry for O.T.