Hi everyone I'm hoping to get some sound advice here. I'm currently chasing down an issue I've had for over a year now. A quick run down.

Accidentally erased something from the ECU with CAN-Clip.

Since doing so my boost control is not working and I have a 3000rpm rev limit in which the turbo actuator is fully adjusted (spool position).

Injectors have been reprogrammed and nothing seems wrong with the way the engine is running. Idles fine starts instantly. Immob and keycards all working etc.

I have since done a read with kess v2 and then sent my ECU to a friend who has done a full BDM read (which I will attach)

My maps all seem to be there however the BDM read gave a slightly different SW number than the kess read did.

Kess sw 1037386560
BDM Sw 1037382377
Hw stayed the same.

Ecu is still with my pal who has it on a rig to flash anything back to fix it.

I would gladly pay anyone that could fix the issue I'm having or even give me a solid solution as the car has been off the road having work done and this is the final thing to fix to complete the project.


I look forward to hearing from you guys and learning some more about my ECU.