FGTech Galetto v54 problem writing EDC17

by **samtex** » Sat Apr 30, 2016 9:28 am

Enabled wrote:Solved!! :D :lol:

how you do to repair error and do the things run right

by **Enabled** » Sun May 01, 2016 2:00 am

Not a fix, but a workaround that works.

0. Read Original ALL with Galletto boot mode. It will give you "All" file (4,224kb), internal flash, external flash, and eeprom, in my case.
1. Paste modified internal flash (make sure checksums are already correct) into the original 'all' file using a hex editor (I use HxD). Align correctly. Internal flash starts at 00, so it is easy.
2. Triple check that the paste is ok, in the right place!
3. Flash modded "all" file with Galletto.
4. It takes much longer to flash a file with differences. It took about 6+ minutes on first part - internal flash. It went to 100%, then to 75% and up to 100% slowly many times. Total over 10 minutes.
5. Read All to verify!
6. Compare with Hex Editor.