Ford C-max map

by **joao-ml** » Tue Sep 29, 2015 4:58 pm

Hi guys I don't know if this is the right place post this but I have a question, I've read the file of a ford focus c-max tdci with my mpps tool. But the map has only 1mb and I've seen maps for 1.6tdci with 2mb... Is this ok or it hasn't read all of the map?
I also haven't seen a map with this sw number anywhere.

Thanks

by **BokiRS** » Tue Sep 29, 2015 8:44 pm

Its probably edc16c3. It has 1 mb file.

by **joao-ml** » Wed Sep 30, 2015 3:17 pm

The edc16c34 has 2mb and edc16c3 has 1mb?
Thanks ;)

by **BokiRS** » Wed Sep 30, 2015 6:09 pm

by **morphvale** » Tue Nov 24, 2015 7:04 pm

I've heard mpps causes issues with this ECU if you attempt to write the map. I would not try to do it. Use galletto instead.

by **joao-ml** » Tue Mar 22, 2016 6:11 am

Really? Dindn't know about that, I haven't write in it yet it was more to train to find m,aps but thanks for the advice, always learning :)

by **pfmotors** » Mon May 09, 2016 9:51 pm

yes If you wrıte with mpps or galletto probably you will have eeprom problem.You should read and write bmd.its the safest way.

by **paulo_ribeiro** » Tue May 10, 2016 9:56 am

the best way to do it is bdm.

dont use mpps. 99% you lock ecu

by **kennfeld** » Tue May 10, 2016 11:22 am

better use bdm on that one

you risk to loose config file from the eeprom by obd ( injector codes etc )
unless you use official obd tool

by **morphvale** » Fri Jun 10, 2016 7:48 pm

That's usually if you don't follow the 3 minutes off, 3 minutes on after the flash is over.
I've flashed mine around a dozen times and never had any issues. 10 minutes for writing, 3 minutes ignition off, 3 minutes ignition on. Then of you go.