Hi,
I paid to "pro tuner" to do a remap,expecting to get 25% more power and torque,he promised better average consumption.
After 500 km with new map,avg.consumption jumped from 4.8 to about 6.5 liters/100 km. Consumption while driving 70 km/h was bad in comparing to original map,but consumption while driving around 100 km/h was better then the original.
That wasn't the only problem,car didn't feel any faster than before,and after measuring accelerations (80-120 and 80-180 km/h) figures that I got are similar to original (according to zeperfs.com 80-120 7.3 in 4th,I measured 7.6 sec,and 80-180 - 27,6,I measured 28 seconds). If the car really had 170 hp (with this weight) it should go from 80-120 in about 6 seconds and from 80-180 in about 23 seconds.
So here are maps,original,"pro tuner",my try to fix things 2 maps (haven't really tried any of this 2 yet,waiting for some comment,entered some values from ducati corse version)
So if someone could help by reviewing this maps...






Would it be safe to try one of my files and would it change anything ?

Thanks

Here are some map addresses for someone who tries to help me,mostly tuned ones:

Torque:
0E12BA -> 0E14B8
0E14FE -> 0E16FC
limiter 0E8E7E -> 0E8EAE
gears 0EB0A2 -> 0EB232

Turbo:
single 0E646C
0F82DA -> 0F84D8
0F89E8 -> 0F8BE6
single 2 0F8BE8

Fuel,soi:
0EA746 -> 0EA944
0F4DC2 -> 0F50E0
1- 0ED60C -> 0ED80A
2- 0ED850 -> 0EDA4E
3- 0EDA94 -> 0EDC92
4- 0EDCD8 -> 0EDED6
5- 0EDF1C -> 0EE11A
0FC156 -> 0FC354
0FC9B6 -> 0FCA34
0FCA64 -> 0FCB22

Other (not changed):
0FD08A -> 0FD288
0E2838 -> 0E29F6
0F6A02 -> 0F6C00
0E9B7A -> 0E9D78
0E9DBE -> 0E9FBC
0EA49C -> 0EA69A

here is map pack

will someone help now ? or at least tell is there something wrong with "pro tuner" map ?

I can help you, but unfortunately I have only one post and I can't get your tuned file. If you want you can send me PM and I'll see what's so wrong with tuned file.

156 edc16c8 by me... !!!The checksum is incorrect!!! BAD

I'm not special, but would do so.
ernst One more post and then you can download.

Ok ;)

The IQ is set to 111 mm3 this value is for about 210 PS
For this engine 80mm3 = obout 180PS, 90=190PS 100=200+
For this PS IQ you have to modification IQ vs NM maps. Of course is modified but for 500Nm !
SOI is modified only for 90mm3
You have the factory clutch ? These values of torque limiters are very dangerous for standard clutch.
Atm. turbo limiter and SVBL is too big. 2,6 bar is max for this turbo. This value is very dangerous for this turbocharger !
SVBL2 - FBA2E is don't modified... happily. Still is max 2500 mbar.
Rail pressure and rail limiters is don't modified.
What else has changed ? Dread to think ...Tuning is bad (pro tuner file "156 edc16c8 pro tuner.bin ") only egr off is correct.

I you want I can send you correctly the mappack and correctly the tuned file for about 390 Nm and 190 PS. The last time (about 2 month ago) I tuned this ECU.

Sorry for my bad english ;)

I already have a tuned file from "pro tuner" and i have similiar problem. The car is powerful, but i think something wrng. The boost is 1,5bar its ok, but no any smoke. I knw the smke is bad but if this car is really pwerful, i have t see little bit smke but nthing, and i drove my friend car with 150hp versin and remap and much mre pwerful. Anybdy can check it?

diesel89434 wrote:I already have a tuned file from "pro tuner" and i have similiar problem. The car is powerful, but i think something wrng. The boost is 1,5bar its ok, but no any smoke. I knw the smke is bad but if this car is really pwerful, i have t see little bit smke but nthing, and i drove my friend car with 150hp versin and remap and much mre pwerful. Anybdy can check it?

Correct mod in Ur PM. Have fun mate.