ME 7.5.5 / Write Aborted at 78% - Anytime!

by **d0xx** » Thu Sep 19, 2013 1:31 am

Hy, today i tried to update the ME 7.5.5 ECU (Audi S3, 225bhp, Bosch: 0261207751, SW: 362999).

First, the original Galetto 2.55 Failed to write! (ID and Readout is possible).. With an Galetto 1, it starts to program, and ANYTIME, it stops at exactly 78%.. If i turn ignition off/on, the car starts perfectly, but when i read out the software, there are NO Changes in it.

What is this? Can someone help me?
Sorry for my bad english.

d0xx

by **Auditune** » Thu Sep 19, 2013 2:19 pm

What year is the s3 sometimes you need to pull the dash fuse to stop coms errors if not bench flash it or boot mode

by **rlees85** » Mon Sep 23, 2013 7:06 pm

This probably doesn't help you what so ever but I'll throw it out there anyway. I had good results with ME 7.5 using a KWP2000+ flasher and the special ME 7.5 KWP software found on these forums...

by **d0xx** » Mon Aug 03, 2015 6:32 pm

Hy, its a late answer.. but i found this thread, and wanna answer my own problem..

The Car was hardware-tuned before, with an "encrypted" EEPROM (+ socket) in the ECU.
So i replaced it with Stock EEPROM and everything was fine.

Greets