Immo on EDC15P+

by **kennfeld** » Wed Jul 31, 2013 10:24 am

se-pro wrote:Can someone tell me how to read out the eeprom or shall i remove the eeprom for immo off?

I read that it is possible via OBD with the right tool. Which tool do i need?

http://abrites.com/index.php?route=prod ... duct_id=67

by **tsj** » Wed Jul 31, 2013 11:34 pm

Yes you can do it via OBD simply using AVDI :)

by **scanner11** » Tue Aug 20, 2013 10:08 am

se-pro wrote:Can someone tell me how to read out the eeprom or shall i remove the eeprom for immo off?

I read that it is possible via OBD with the right tool. Which tool do i need?

I ask you what kind of car，If your car alarm from the control it. Recommendations to 4s shop lifting
Simply plug the Drive Box EDC15/ME7 into the vehicle's diagnostic socket (OBD2) Then put the OBD2 and switch to '' OFF ''on Drive box .
After only 20 to 30 second the immobilizer DEACTIVATED (IMMO OFF)
NO NEED TO COMPUTER!!!

by **delimemet** » Tue Aug 27, 2013 4:39 pm

both way is easy

by **endriu233** » Sun Nov 17, 2013 7:47 pm

Hello, when You remove immo from flash 24C04, then You must cut "pin" who is going from immo to the ECU.
If You don't do this the ECU learning immo again.