vagtacho

by **muurman** » Mon Oct 15, 2012 5:58 pm

I bought a vagtacho 3.01 cable.
But got the error usb to k-line interface not found.
I got a template from someone with a vagtacho 1.7 cable and with that template programmed ( using mprog 3.0 ) vagtacho 1.7 software says usb to k-line found.
But i want to use vagtacho 3.01
Can someone upload a vagtacho 3.01 template?

by **boblepepeur** » Fri Nov 16, 2012 12:20 am

hello, can you give me your template please ?

by **bogdanwmw** » Fri Jan 11, 2013 10:53 am

Are large differences between the versions? And that is in addition to each other?

by **kennfeld** » Fri Jan 11, 2013 6:51 pm

better to put back you original one and try the recovery mode of you official one or send it back underwarranty

ps is het niet verboden in nederland met tellers te knoeien ???

by **dorcky** » Sun Mar 03, 2013 12:47 pm

here is the template for vagtacho 3.01
Ft245RL.ept

Code: Select all: [Basic Details] Device Type=7 VID PID Type=1 USB VID=0403 USB PID=D099 [USB Power Options] Bus Powered=1 Self Powered=0 Max Bus Power=100 [USB Serial Number Control] Prefix=FT Use Fixed Serial Number=1 Fixed Serial Number=FTQ97ZSP [USB Remote WakeUp] Enable Remote WakeUp=1 [Windows Plug and Play] Enable Plug and Play=0 [USB String Descriptors] Manufacturer=FTDI Product=USB <-> ISO Interface [Programming Options] Only Program Blank Devices=0 [BM Device Specific Options] USB Version Number=1 Disable Serial Number=0 IO Pin Pull Down in Suspend=0 [Dual Device Specific Options A] RS 232 mode=0 245 FIFO mode=0 245 CPU FIFO mode=0 OPTO Isolate mode=1 High Current Drive=0 [Dual Device Specific Options B] RS 232 mode=1 245 FIFO mode=0 245 CPU FIFO mode=0 OPTO Isolate mode=0 High Current Drive=0 [Dual Device Driver Options A] Virtual Com Port Driver=1 D2XX Driver=0 [Dual Device Driver Options B] Virtual Com Port Driver=1 D2XX Driver=0 [R Device Specific Options] Invert TXD=0 Invert RXD=0 Invert RTS#=0 Invert CTS#=0 Invert DTR#=0 Invert DSR#=0 Invert DCD#=0 Invert RI#=0 C0 Signal=13 C1 Signal=13 C2 Signal=13 C3 Signal=13 C4 Signal=1 Enable Ext Osc=0 High Current I/O=0 Load D2XX Driver=0 In EndPoint Size=0 [DualHS Device Specific Options] IFAIsFifo7=0 IFAIsFifoTar7=0 IFAIsFastSer7=0 AIsVCP7=0 IFBIsFifo7=0 IFBIsFifoTar7=0 IFBIsFastSer7=0 BIsVCP7=0 IOPinDriveDual=0 UTMIDrive=0 UTMIVendor=0 SuspendOnD7Low=0 [QuadHS Device Specific Options] AIsVCP8=0 BIsVCP8=0 CIsVCP8=0 DIsVCP8=0 ARIisTXDEN=0 BRIisTXDEN=0 CRIisTXDEN=0 DRIisTXDEN=0 IOPinDriveQuad=0