Recovering ecu

by **Ben** » Sun Apr 27, 2014 10:04 pm

How can i unlock ecu, which hardware and software i use.

by **Homiczek** » Mon Apr 28, 2014 9:22 am

Hi

We are not fortune-teller's :)

Different ecu's has different methods.

Write type of ecu

by **pascu_b** » Mon May 05, 2014 11:30 pm

i have exact same problem...my ecu is edc15p+ skoda octavia axr 101 2008...can you help me?

by **mocPL** » Tue May 06, 2014 10:02 pm

i guess you`ll need to do the bench operation extracting your 29f400 flash and putting another one processed by programmer, with appropriate content to be compatible with 24c04, an immo.

by **Homiczek** » Wed May 07, 2014 4:05 pm

pascu_b wrote:i have exact same problem...my ecu is edc15p+ skoda octavia axr 101 2008...can you help me?

people says that brick edc15p is very hard

mpps at low speed and should work

by **abc-tuning** » Fri May 16, 2014 11:39 pm

if you have original file, try to write in slow mode ( recovery ) by mpps,..
Remove requested fuse and try to write original file and maybe it will not work in first try, just keep trying,...

If that doesnt work you have two options:
bench mode ( boot mode )
desolder flash

by **gege21** » Sat Jun 14, 2014 3:20 pm

tu as trouvez une solution

by **alanivo** » Wed Aug 06, 2014 12:46 pm

mocPL wrote:i guess you`ll need to do the bench operation extracting your 29f400 flash and putting another one processed by programmer, with appropriate content to be compatible with 24c04, an immo.

is it possible to remove the 29f400 chip from another ecu which i have flashed with original (bricked) ecu and solder it onto the board of the bricked ecu?

by **2xded** » Wed Aug 06, 2014 2:45 pm

Yes, you can do it. Just write the dump in the programmer.

by **jason1.8t** » Mon Aug 11, 2014 12:52 am

i recovered a friends 1.9tdi ecu with mpps, the car needed a to be charging to write to it. We'd written a bad file to it and it wouldn't start, he was panicking as i didn't seem to be able to write the original file back to it. It turned out to be the battery voltage under 13 volts, put a charger on it and it wrote first time. It might help, good luck