BMW 2006 E60 530D AUTO 231 170KW

by **R111SHB** » Wed Dec 31, 2014 6:22 am

BMW 2006 E60 530D AUTO 231 170KW
Bmw Ecu Type BOSCH EDC16CP35C (BMW)
Bmw Hardware ID: 07808222
Bmw Software ID: 07793497
Bosch Hardware Number: 0281013253
Bosch Software Number: 1037387658
Programming Date: 30.05.2006

Hi everyone. New to ECU tuning. Can anyone advise to what level can the above car be tuned for maximum performance? I am seeing lots of people offering different levels of torque varying between 560-615nm.

Happy New year!!

by **Jartsa** » Wed Dec 31, 2014 7:39 am

I have exact same car and I have 740nm of torque. Done over 75000km on it with this setup.

by **parik** » Wed Dec 31, 2014 12:06 pm

i have prepered 280hp 600nm, dpf on, stock lambda

by **R111SHB** » Thu Jan 01, 2015 2:27 am

Happy New Year everyone!

Jartsa wrote:I have exact same car and I have 740nm of torque. Done over 75000km on it with this setup.

Hi Jartsa is that on stage 2-3?

by **parik** » Thu Jan 01, 2015 3:49 am

Hi, i can make 600nm, 650nm or 680nm (280-320ps) tuned file. Stock turbo have high boost. then high AFR for car with DPF. David

by **Jartsa** » Fri Jan 02, 2015 8:17 am

Don`t know what stage :). I had it made by tuner friend. Oh I do have 535 LCI injectors (Piezo) and DPF, EGR OFF. Don`t really know whats the injectors part on this, changed them cause got them cheap and had problems with the original injectors.

by **R111SHB** » Sat Jan 03, 2015 10:08 am

Would you be able to share the file buddy?

Jartsa wrote:Don`t know what stage :). I had it made by tuner friend. Oh I do have 535 LCI injectors (Piezo) and DPF, EGR OFF. Don`t really know whats the injectors part on this, changed them cause got them cheap and had problems with the original injectors.

by **Jartsa** » Sat Jan 03, 2015 10:32 am

What tool would be good to read maps from these BMWs? I havent got any tool atm. Im trying to get hold of the basics of these ecus.

by **augustinbz** » Sun Jan 04, 2015 11:25 am

too much hp, will damage soon the car. cannot get more than 50-60hp on this car without any other hw mod.

by **Evolution_pl** » Sun Jan 04, 2015 11:35 pm

http://evodynamics.pl/images/phocagallery/galleries/projekty/wykresy/thumbs/phoca_thumb_l_bmw%20330xd%20e91%20moc.jpg
After removing the dpf and replace it with sports catalyst for serial injection system and the cooler 335d, such results are possible. The bottom line is that the safe outcome for the engine and turbo, and the dual-mass wheel. The original clutch is on the verge of endurance.