Idle speed EDC15c5 and start rpm/rail

by **bsjtd_gt** » Fri Jan 02, 2015 1:20 am

Deman wrote:Usually there 7B9E2. Or search 00900 00900 00900 ...

Hi friend thanks so much
can you tell me were do you have this info or how do you know or if you have a damos file for this Ecu you have so accurate addresses

by **Deman** » Fri Jan 02, 2015 3:00 pm

By 15с5 I have no DAMOS

by **bsjtd_gt** » Sat Jan 03, 2015 11:42 pm

Deman wrote:By 15с5 I have no DAMOS

Can you tell me where do you get this info or are you some kind of genius

by **Deman** » Sun Jan 04, 2015 1:53 pm

bsjtd_gt wrote:Can you tell me where do you get this info or are you some kind of genius

:D No, I'm just on the forum suggested. And the rest of the card is similar.
Old car is difficult to start. Wait edit schechi intensity, and setting the engine is started. But it 15с7.

by **Deman** » Sun Jan 04, 2015 2:09 pm

Wait edit glow plugs and engine start-up settings.

by **fabio** » Sun Jan 04, 2015 10:57 pm

I have an alfa 147 JTD edc15c7 and I increased idle RPM by changing the value of maps that are located at these addresses 0782D6,071CDE. original values are about 850, I have changed it to 925...I hope i was helpful

by **vgeorgiev** » Wed Jan 14, 2015 10:05 pm

Thank you for your map pack!

Anyone know any other IQ limit map ?
I guess there is a map IQ limited my Intake temperature and IQ limited by fuel pressure.

by **rogman.r** » Mon Jan 19, 2015 2:17 pm

Libi wrote:I found EDC15C5 fiat

map pack is ok.
I download, del rar ext and import to winols.

Don't work just changed the idle speed map. You must change and the other values. Just change this map work for a while and then rpm drop to 850.

by **rogman.r** » Mon Jan 19, 2015 2:29 pm

Deman wrote:Usually there 7B9E2. Or search 00900 00900 00900 ...

Same in EDC15C7.You don't get that just change this map. Example you changed rpm idle speed to 900 in this map. You turn up the car and you get this 900 rpm and after few minutes get 850 rpm again. Of course the car is warmed up to working temperature.

by **Libi** » Sat Mar 21, 2015 3:01 pm

Yes this is true.
The map is keep rpm up when engine is warming, after that is drop down ok 800 (2.4) or 850(1.9) there must be single value or something like this
Can someone help ?