Hello all, new to this and hoping for some help.
I have read the code from my car.
I am going to use the code as a basis of learning but to be honest im struggling so far.
Does anyone have the map locations for the said vehicle? many thanks
winols 2.24 for E39 530d 142kw
ECU:
Bytes: 7FFFF
Checksum: 1F68
Marca: Bosch
Num. HW: 1037351761
Num. SW: 1037351761
Default .bin https://www.dropbox.com/s/6cbo5bv3jlpxtss/E39%20530D%202001-12%20142%20kw?dl=0

look this

Thanks for file.
Today i have taken .bin file from professionally tuned E39 530d 2003 manual 170 kw.
Bytes: 7FFFF
Checksum: 9420
Marca: Bosch
Num. HW: 1037351761
Num. SW: 1037351761

.bin file link.

https://www.dropbox.com/s/fzuuqg4bh85re4b/e39%20530D%202003%20170%20kw?dl=0

My car ecu in the first post.

Question:
Can i use this .bin file for my car ? Hardware and software is a same.
I understand that i can not put this file to my car directly, can i take info from that file and put to my default .bin. But my cars gearbox is automat.
This file from manual gearbox .

I would be grateful for advice and information.