Increase torque

by **lostsoul** » Fri Feb 06, 2015 10:23 pm

Hi everyone,

few months ago i swapped my clio 97 diesel engine with 1.9dci cr engine from megane. I am playing around some maps on winols and vnt turbo looks working fine now. How i could increase torque, advance injection? i know more fuel should increase...

for example:
Megane 2 1.5dci has 105hp and 240nm
megane 1 1.9dci has 100hp and 200nm (my engine)

by **edgaras** » Sat Feb 07, 2015 12:09 am

new technologies new pumps turbos engine etc...
you can tune it by 30% up torque

by **lostsoul** » Sat Feb 07, 2015 1:20 am

i rebuilt the engine, changed piston to KS with internal oil cooler, high quality engine bearings.. i am looking to get around 150hp and 300nm.. at moment it has gt2052v turbo, do you think with stock injectors,fuel pump (bosch cp1,1350bar) i could reach this power ?

by **edgaras** » Sat Feb 07, 2015 11:46 am

lostsoul wrote:i rebuilt the engine, changed piston to KS with internal oil cooler, high quality engine bearings.. i am looking to get around 150hp and 300nm.. at moment it has gt2052v turbo, do you think with stock injectors,fuel pump (bosch cp1,1350bar) i could reach this power ?

you can reach ~130hp..

by **lostsoul** » Sat Feb 07, 2015 6:48 pm

thank you for you help edgaras.. :thumbup:

by **edgaras** » Sat Feb 07, 2015 9:34 pm

lostsoul wrote:thank you for you help edgaras.. :thumbup:

upload ori file i will tune it :)

by **lostsoul** » Sat Feb 07, 2015 11:51 pm

Niceeeeee :) thank you again!!

if i am not asking you too much, could you check the mappack that i am using.. some maps i'm not sure...

by **edgaras** » Sun Feb 08, 2015 12:12 am

Try and report.

by **lostsoul** » Sun Mar 01, 2015 8:29 pm

i swaped ecu yesterday to test you file, it is nice, but with vnt20 for that boost pressure needs lot more fuel, the n75 map of stock are for fixed geometry turbo and don't work well with vnt20...