Hi all,
After 'professional" EGR removal there is an 'Antipollution fault' message. Peugeot Planet reads errors from the ECU, but is not able to clear them. Only 2 errors - one related with Glow Pugs rellay and the other one is "No communication with ABS ECU".
I've tried with another ABS unit - same error.

The car runs OK, EGR closed, no errors related with it. Only MIL is on.

Any suggestions?

Hi,

if you take back the original SW the errors are gone?

i think the software repair are incorenct m8. need another solution.

I'll try to flash back the original SW these days, but I wonder is it necessary to clear errors before reflash with SW w/o EGR. I do not belive that changing only bytes related to EGR can lead to such effects. I'll try and keep posted.

I had the same problem with a Peugeot 807 turned out to be the software I flashed into the ECU was the wrong engine version.
Put back the original file, clear the fault codes and see if PPlanet still does not see the abs unit if communication is okay remap your orinalal file again.