Laptop died while flashing Edc15v. Cannot get it to recover.

by **BramanteIndustries** » Fri Apr 03, 2015 10:46 pm

As the title says, flashing my car via obd my laptop died. I've been trying to get it into boot mode with no success. This is all through the car. Will I have better luck doing a bench flash and how would I go about doing so. Thanks.

This is my daily driver btw... HELP.

by **habbyb** » Fri Apr 03, 2015 10:59 pm

if you try with mpps at generic menu and put pin 24 to ground befor conecting power suply and you cannot write the only way to recover is to desolder the flash 29f400 and write it on a external programmer , good luck mate

by **BramanteIndustries** » Sat Apr 04, 2015 12:19 am

Ugh. Not what I wanted to hear. Just so I know everything is being done correctly, what pin is pin 24 on a vw golf TDI alh. All the pictures and diagrams look nothing like mine. Thanks for the help

by **BramanteIndustries** » Sat Apr 04, 2015 4:58 am

Tried boot mode again. No dice

by **BramanteIndustries** » Sat Apr 04, 2015 5:11 am

So how would I go about programming my eemprom chip? Remove it then what?

by **habbyb** » Sat Apr 04, 2015 12:28 pm

Remove 29f400 from motherboard put it in external programmer like minipro xeltec willem welon etc write your 512kb file in it and that's it , solder back and start the beast