POPCorn Diesel Rev Limiter

by **ibizadr** » Wed Jun 10, 2015 4:45 pm

Is that possible to make rev limiter on vag edc15 suite?

by **bally199** » Fri Jun 12, 2015 2:05 am

ibizadr wrote:Is that possible to make rev limiter on vag edc15 suite?

Yes, very easy.

You can do it two ways. You can do it the 'classic' way by using the torque limiter, or you can use the launch control map (if you activate it).

Basically ,decide what RPM you want the hardcut at, and cut fuel after that. I tend to have a 15rpm difference between fuel and no fuel as it gives a nice tone, and isnt as hard on the crank as a 1rpm difference (ahem, darkside!)

by **manfred** » Fri Jun 12, 2015 9:07 am

Any1 did this for 1.6TDI CR?

^

Yes i can

by **ibizadr** » Fri Jun 12, 2015 10:00 am

bally199 wrote:
ibizadr wrote:Is that possible to make rev limiter on vag edc15 suite?

Yes, very easy.

You can do it two ways. You can do it the 'classic' way by using the torque limiter, or you can use the launch control map (if you activate it).

Basically ,decide what RPM you want the hardcut at, and cut fuel after that. I tend to have a 15rpm difference between fuel and no fuel as it gives a nice tone, and isnt as hard on the crank as a 1rpm difference (ahem, darkside!)

Can you explain me how to make rev limiter in the torque limiter? Send me a pm or explain here... If i try by the lauch control map just stoped make rev limiter or when i goes in 3rd at 5000rpm he make the hardcut

by **ibizadr** » Sun Jun 14, 2015 6:45 pm

Anyone? I dont know via edc15 suite

by **ibizadr** » Fri Jun 26, 2015 2:59 pm

What is the best rpm to make it in a 1.9TDI PD... Car Just have 1749vb and fmic...

4800rpm?

by **ute** » Sat Jun 27, 2015 11:06 am

hi people I am new here and I thing the best way Is using launch control map, because torque limiter is for max rpm
from 2450rpm to 2500 on 50%

by **walz** » Sat Jun 27, 2015 2:55 pm

NeTeR wrote:
walz wrote:
walz wrote:My limiter with 3rpm gap at Torque Limiter. Sounds great but still too slow imho :)
http://youtu.be/OU6VApfJVq0

Finally I've got popcorn :thumbup:
https://youtu.be/aW627Vdx61M

Diferences between these 2 videos it's only a change in the svrl or in any other map ?
thanks in advance

First vid - Rev limiter only in Torque Limiter map. SVRL above TL.
Second vid - Rev limiter only in SVRL. SVRL below limiter in TL. Nothing else was changed.