peugeot 406 15c2 Mod error P0903

Posts related to map selection, map location, correct map treatment.
Post a reply

Return to Map Location and Addresses

peugeot 406 15c2 Mod error P0903

Postby Deman » Tue Oct 14, 2014 9:12 pm

Filled firmware mod 406 hdi2.0 and when brought the car, the engine is idling the error occurred P0903 "Clutch Actuator Circuit High". What's wrong in MOD file?
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

Deman
Diamond
 
Posts: 373
Joined: Sat May 04, 2013 11:17 am
Location: Belarus

Re: peugeot 406 15c2 Mod error P0903

Postby Vasily_U » Wed Oct 15, 2014 9:48 am

see pm

User avatar
Vasily_U
New user
 
Posts: 16
Joined: Sun Jun 08, 2014 1:58 pm
Location: Belarus, Minsk

Re: peugeot 406 15c2 Mod error P0903

Postby michass » Wed Jul 08, 2015 11:00 pm

Hi,
I have this same problem in my 206 2.0 hdi
Do you have any solution?
Best regads

michass
Gold
 
Posts: 144
Joined: Tue Jun 10, 2014 9:00 pm
Location: Poland

Re: peugeot 406 15c2 Mod error P0903

Postby Deman » Thu Jul 09, 2015 9:14 am

This has been a significant difference in the given air flow to measure the flow of air, but this was due to changes in EGR map.

Zostało to znacząca różnica w danym przepływie powietrza do pomiaru przepływu powietrza, a to ze względu na zmiany w karcie EGR.

Deman
Diamond
 
Posts: 373
Joined: Sat May 04, 2013 11:17 am
Location: Belarus

Re: peugeot 406 15c2 Mod error P0903

Postby michass » Thu Jul 09, 2015 9:52 am

Thanks,
What is the Best Solution?
Use Stock EGR and switch them off or blanking?

michass
Gold
 
Posts: 144
Joined: Tue Jun 10, 2014 9:00 pm
Location: Poland

Re: peugeot 406 15c2 Mod error P0903

Postby Deman » Thu Jul 09, 2015 12:25 pm

all in one

Deman
Diamond
 
Posts: 373
Joined: Sat May 04, 2013 11:17 am
Location: Belarus

Re: peugeot 406 15c2 Mod error P0903

Postby michass » Thu Jul 09, 2015 2:35 pm

Thank you.
I have problem with locate egr switch in my maps.
I change egr maps to Stock and blank them phisically, should be ok.
Thank you one again!

michass
Gold
 
Posts: 144
Joined: Tue Jun 10, 2014 9:00 pm
Location: Poland

Re: peugeot 406 15c2 Mod error P0903

Postby michass » Thu Jul 09, 2015 3:18 pm

I found two egr switches.
I will return to original egr maps and switch them off.
On saturday i try to unplug vacuum from egr valve.
:D :D :D

michass
Gold
 
Posts: 144
Joined: Tue Jun 10, 2014 9:00 pm
Location: Poland

Re: peugeot 406 15c2 Mod error P0903

Postby Deman » Thu Jul 09, 2015 9:04 pm

it is necessary to disconnect the electrical connector from the solenoid. and then there are other glitches.

Deman
Diamond
 
Posts: 373
Joined: Sat May 04, 2013 11:17 am
Location: Belarus

Re: peugeot 406 15c2 Mod error P0903

Postby michass » Thu Jul 09, 2015 10:42 pm

Deman wrote:it is necessary to disconnect the electrical connector from the solenoid. and then there are other glitches.

Why necessary? When i switch EGR off in my bin file they should be closed all Time.
What other glitches?

michass
Gold
 
Posts: 144
Joined: Tue Jun 10, 2014 9:00 pm
Location: Poland
Next
Post a reply

Return to Map Location and Addresses

Who is online

Users browsing this forum: No registered users and 1 guest