I have done some work already and have the following locations & details for the maps.
If someone in the know who could possibly help checking the ones I have so far, are correct, and give a bit more detail to those that have none, that would be greatly appreciated. I am sure there are some limiters and no doubt some others too so if anyone can help with these addresses and details that would be great.

Thanks

Steve.

E01C4 - Drivers Wish 1 (9x15) Torque(Throttle Position,Engine Speed)/NM
E0408 - Drivers Wish 2 (9x15) Torque(Throttle Position,Engine Speed)/NM
E0B70 - Torque Limiter (25x1) Torque Limiter(Engine Speed)/NM
E0C92 - I.Q Limited by MAF - Smoke Map (16x16) IQ(Mass Air Flow,Engine Speed)/mg/str
E0FFA - Mass Air Flow (16x15) EGR Map(IQ,Engine Speed)/mg/str
E1242 - Mass Air Flow 2 (16x16) EGR Map 2(IQ,Engine Speed)/mg/str
E21F2 - EGR 1 (16x1) Duty Cycle(Duty Cycle)/%
E224E - EGR 2 (16x1) Duty Cycle(-)/%
E7B3E - Torque Limiter (21x1) Torque(Engine Speed)/NM
E7CE2 - Drag Torque (16x16) -(-,-)/- ???
E80FA - Torque Limiter 1 Gear Dependant (21x1) Torque NM(Engine Speed)/NM
E8150 - Torque Limiter 2 Gear dependant (21x1) Torque(Engine Speed)/NM
E81A6 - Torque Limiter 3 Gear Dependant (21x1) Torque(Engine speed)/NM
E8226 - Torque Limiter 4 Gear Dependant (21x1) Torque(Engine Speed)/NM
EA34A - Start of egnition (16x16) -(-,-)/- ???
EA59E - Injection Qty 1 (16x16) Injection Qty(Torque,Engine Speed )/mg/str
EAA82 - Injection Qty 2 (16x16) IQ(Torque,Engine Speed)/mg/str
EACC6 - Injecton Qty 3 (16x16) IQ(Torque,Engine Speed)/mg/str
EB1B4 - Gear 1 Torque Limiter (10x1) Torque(Engine Speed)/NM
EB1F6 - Gear 2 Torque Limiter (10x1) Torque(Engine Speed)/NM
EB25C - Gear 3 Torque Limiter (10x1) Torque(Engine Speed)/NM
EB29E - Gear 4 Torque Limiter (10x1) Torque(Engine Speed)/NM
EB2E0 - Gear 5 Torque Limiter (10x1) Torque(Engine Speed)/NM
EB322 - Gear 6 Torque Limiter (10x1) Torque(Engine Speed)/NM
EB364 - Gear 7 Torque Limiter (10x1) Torque(Engine Speed)/NM
EB3A6 - Gear 8 Torque Limiter (10x1) Torque(Engine Speed)/NM
EC0E8 - Swirl flaps (16x12) -(-,-)/- ???
EDAE0 - Start of Injection 2 (16x16) Degress before TDC(IQ,Engine Speed)/Deg
EDD24 - Start of Injection 3 (16x16) Degress before TDC(IQ,Engine Speed)/Deg
EF7CE - Start of Injection 4 (16x16) Degrees before TDC(IQ,Engine Speed)/Deg
F651A - Duration (40x16) Duration(Injection Qty,Rail Pressure)/ms
F905B - Turbo Vane Control N75 (16x16) Duty Cycle(Injection Qty ,Engine Speed)/%
F929C - Turbo Vane Control (16x16) Duty Cycle(IQ,Engine Speed)/%
F9A10 - Turbo Vane Control (16x16) Duty Cycle(IQ,Engine Speed)/%
F9C56 - Turbo Vane Control (16x16) Duty Cycle(IQ,Engine Speed)/%
FA0D6 - Boost Map (16x16) Boost Pressure(Engine Speed,IQ)/mb
FA31A - Boost Map (16x16) Boost Pressure (Engine Speed,IQ)/mb
FA55E - Boost Map (16x16) Boost Pressure(Engine Speed,IQ)/mb
FA78A - Boost Limit (10x10) Boost pressure(Engine Speed,Atmospheric Pressure)/mbar
FA9A2 - Single Value Boost Limit (1x1) Boost Limiter/mbar
FAF70 - Turbo Vane Control (16x16) Duty Cycle(IQ,Engine Speed)/%
FB38E - Single Value Rail Pressure limiter (1x1) Rail Pressure/bar
FCAAE - Rail Pressure Limiter (12x8) -(-,-)/- ???
FD21A - Rail Pressure Limiter (12x8) -(-,-)/- ???
FD348 - Rail Pressure Limiter (16x16) Rail Pressure(IQ,Engine Speed)/bar
FD8CA - Rail Pressure (16x16) Rail Pressure(IQ,Engine Speed)/bar
FDD28 - Single Value Rail Pressure Limiter (1x1) Rail Pressure/bar
FDD66 - Rail Limiter (5x6) Pressure(-,-)/bar
FDDBC - Flat Rail Pressure Limiter (6x5) Pressure(-,-)/bar

Hi, I am also working on a e46 330d, but it's software version 361842, the addresses are almost identical, as far as I've noticed only the tricky to find torque limiters had an address offset.

E8DA0- Lambda Map 1 Lambda(MAFxengine speed) 16x16
E8FE4- Lambda Map 2 16x16
E96B0- Lambda Map 3 16x16
E98F4- Lambda Map 4 16x16