Hello everyone,

i've been trying to make my file as good as I can before i was going to show it to you. I hope that it's not that bad :P

Can you give me some feedback it would be veeeery nice of you :)

PS
I haven't tried this modded file on my car.
PPS
here are some logs I did on my ori file:
DYNAMIC:
Group 001: http://vaglog.pl/log_270665.html
Group 003: http://vaglog.pl/log_270664.html
Group 011, 003, 008: http://vaglog.pl/log_270661.html
Group 011: http://vaglog.pl/log_270660.html
Group 008: http://vaglog.pl/log_270658.html
Group 004: http://vaglog.pl/log_270656.html
Group 010: http://vaglog.pl/log_270655.html

STATIC:
Group 011: http://vaglog.pl/log_270663.html
Group 023: http://vaglog.pl/log_270662.html
Group 013: http://vaglog.pl/log_270657.html
Group 007: http://vaglog.pl/log_270654.html

egr map is wrong... not closed.
driver wish need more change.
boostmap is 2150 SVBL map also wrong ;)
boostlimit map is 2100 and you ask 2150...

I closed egr only above 2200RPM, because I read somewhere that when egr is on the fuel consumption is lower.
I've set svbl to 2150, because as I said it's my first tune and I don't want to broke something :P
Boostlimit map changed to 2150 :)

Driver wish -> what changes do you suggest?

PS
my goal is to make safe and daily driving soft :)

ups, forgot upload the file..

Mate take a look in this file and try it on car! :thumbup:

thanks mate, but i think this is too powerful mod for me: in VAGEDCSuit dyno 167hp and 356NM :D
were you on real dyno with this mod? i'm curious how VAGEDCSuit dyno values are compared to real dyno :)

Meanwhile I've changed in my file:
-drivers wish (now drivers wish, smoke limiter and torque limiter are similar)
-IQ by MAP limiter (from 50 mg to 60 mg)
-target boost map (up to 2160 mbar)
-boost pressure limiter (2200 mbar)
-N75 duty cycle (up to 82%)
-SVBL (2200 mbar)

All your suggestions are welcome :)

first question i have for you is: what is your goal with this file?

this tune is very light indeed you wont even make 130HP with this file!

you only changed the first smoke limiter in your map which is the smoke limiter for -20 deg C temp. the other maf smoke limiters you have only changed the x axis data?

and what did you try do do in the launch control axis?

this tune is not good at all.

My goal is to make daily mod, something about 130-140HP and ~320NM. I want to make it safe for my standard clutch.

Thanks for info about smoke limiter, I'll change that.
Yes, in maf smoke limiter I changed x-axis to 1200mg/st. Values are original. I left them (60mg) because i don't ask for more in any map.
In launch control axis I was trying to make launch control - I was following some tutorial :P

Can you give me any other clues to make it right?

this map wont make 130 hp, the launch control works with iq against rpm and speed. your map really needs more changes.

Can anyone tell me something with any meaning? Replies like "map need more changes" really doesn't tell me anything :?