hello,

I just tryed to tune my own file a bit so im hoping you guys can help me a improve + in a bit im going to install a 12mm pump so do i need to change alot for this mod??

thanks

here is ori and stage 1

Im just a beginner like you, so as i see you have changed :

- EGR
- SVBL
- Turbo Map
- N75
- Pressure Limiter
- Drivers Wish
- TL
- SOI

Why did you leave untouched smoke and pump voltage maps?

flashtech wrote:Im just a beginner like you, so as i see you have changed :

- EGR
- SVBL
- Turbo Map
- N75
- Pressure Limiter
- Drivers Wish
- TL
- SOI

Why did you leave untouched smoke and pump voltage maps?

my bad i fergot the voltage map but i cant get to the smoke limiter map i use vagsuite and when i click on it it wont open

i have changed the voltage map but vagsuite does not seem to find the smoke limiter map

dreconx wrote:i have changed the voltage map but vagsuite does not seem to find the smoke limiter map

hey.

sorry mate but you need read more about how to chage file, i think you dont know which map is for what and how working. in your TL you want 60 mg but your DW limiting you, n75 ? are you have some log ? i dont think so, why you changed almost half n75 map ? boost limiter ...lool ,on lower atm pressure your turbo not will be happy. pomp voltage map ,half map changed 20-25% ? if you like a lot smoke it is ok ;). your smoke map is not touched like you said. on the picture you have how to add smoke map in vagsuite. like i said better read more how to change maps.



cheers

You can search for MSA15 tuning guide at first - read it and you will understand how to make basic remap for this ecu.

thanks for the replys il have a look at it, had to change driver wish i know but thanks

il start all over again with the information from you guys

thanks for everything

maki4evers - I have question about what you said about boost limiter - why changes on low rpm would be bad for turbo if that is only boost limiter? If you will not increase boost on low rpm than increasing values in boost limiter should not be bad - as they are only limiting boost? Or I didn't understand that.

dreconx - i think that before touch pump voltage map you need to know what nozzles You are using and than you can start doing ir. Did You found tuning guide?

flashtech wrote:maki4evers - I have question about what you said about boost limiter - why changes on low rpm would be bad for turbo if that is only boost limiter? If you will not increase boost on low rpm than increasing values in boost limiter should not be bad - as they are only limiting boost? Or I didn't understand that.

dreconx - i think that before touch pump voltage map you need to know what nozzles You are using and than you can start doing ir. Did You found tuning guide?

i didnt say about increased boost limiter on low RPM but on low atmospheric pressure ;)