Greetings!

This is my tune map for 1.8T AUM, 2001, 150HP.
On dino measured 180ks.
I`m not happy with the results ... max pressure is 1.1bar and falls to 0.6 at red line...

Does anyone can check the map and make changes if necessary,rear o2 delete, sai delete,Evap delete?

06A 906 032HJ 0002
ECU NUMBER 0261207436

mate, first take a look on introduce-yourself !

the file you post is from Skoda 1.8T 180Hp, so, if you go to dyno and measured 180hp its normal.

in your file you have a lot of mistakes. fueling its not calibrated correctly.

to do a good stage 1 remap you need to do small change and log. after that, more small changes and log.

post here log's of your car. boost, knock detonation, torque monitoring, etc. to people help you

sorry!! I forgot to introduce myself...

I did not know that the map from stock Skoda 1.8T 180hp....I paid for remap in one service...promised that 192ks :)
Which logs I need to post (vagcom)? 002,032,116?

Here is dyno..

https://s20.postimg.org/a6wkug619/image ... 84e201.jpg

post here your original file.

Original file AUM.

Hi.
I don`t understand, if u paid for the remap and you`re not happy about max hp, why not ask for the corr. in that service :?:
In principle - on this site we rate "our creativity", not commercial setups. Beside don`t expect that anyone with the necessary knowledge improve your soft for free.
This file is from 150hp AUM engine, softcode 362287, average basic commercial remap, nothing dangerous,
the car should be work rightly ( assuming 100% healty hardware) after making couple adjustments based on the logs.

Salute

Remap was made in 2013, no dyno...
Against the factory 150hp, the car goes better ... but when I tried AUM having 215ks, my going bad.

That's why I asked for help to check a map.

I am grateful for your response.

Hi,

I read (write) the file with NefMoto ECU Flashing Software , I have used cheap Vag KKL cable...work fine...

have you checked if you have any boost leaks? my car felt weak when it had leaks