This is my first attempt at a mod file. All comments/improvements/hints/tips welcome. I have calculated this to be approx 125hp @4k :)

Where is the DAMOS?
How am I supposed to know what has changed?
There is nothing "dark" about getting the manual
and the DAMOS to connect it to!

On both of your posts:
bosch-edc-15c-functional-description-funktionsbeschreibung-t7391
and get a DAMOS to your firmware.

If you can't get a DAMOS to your firmware, find one that is similar and has the most correct items (around 2000 or so) and learn from that.

Thanks for the reply, I will post info later when I'm on my computer.

OK here is V2 which i have been using for 2 weeks and it feels good but I feel more is to come. I need to re scale the axis for SOI to allow for my higher IQ.



Here are the maps that are changed-

What I'm suggesting is that you find a file with the most complete DAMOS possible (like the one for 1MB EDC 15C7), with about 1000 variables, and from that you learn in which orther are these programmed, the probability of most of those variables being totally reordered is very low, so, if you find a table in one file, and identical in another file, and the table is preceded or followed by other variables, those are likely the same ones in both files.

Look at it from a perspective of someone writing the software.

Your basis is the same Funkcionsbeschreibung, etc.

Things that are going to be likely the same are for example the economic and sporty turbo maps, why would be those two switched suddenly?

if you can... I have that link to EDC15C7 (Astra??) in my thread, download it and browse it, it is the most complete one you'll ever find :P

The trouble is that either many tables are broken or are broken by design (By the BOSCH company).

I haven't seen your files yet, but shouldn't there be a second, smaller, 8x1 Torque Limit map besides the 19x1 main one and the 12x1 for downgraded mode? Mine looks like this:

It will exist but I haven't looked for it because it's there for protection which I want :)

Lyecon I do have a Damos for EDC15C2 which I've converted into my file. The picture above is only the maps I've changed.

Is it that the full DAMOS project file from the 807/C8 with messed up axis definitions you're refering to, Uberderv? Or is there another one that I'm not aware of?

Yes, there is a French one for the Peueot and and English one for a Hyundai. I don't either are perfect but close enough to figure stuff out.