E61 automatic 530dx 235hp map location

by **kimizz** » Fri Sep 13, 2019 11:06 am

Hi guys!
I need help with find map for stage1 and check if the ones i found are correct
I cant find TL etc.
https://i.imgur.com/IZ6rMn8.png

by **Aladinnu** » Sun Sep 22, 2019 8:11 am

all these are Torque Limiters map adresses.
D8FD8
D9C60
F9F70
F9FA8
F9FDE
D9E0A
D9BFC

by **adriancl** » Sun Sep 22, 2019 7:46 pm

Aladinnu wrote:all these are Torque Limiters map adresses.
D8FD8 Torque limiter
D9C60 Torque Limiter
F9F70 Setpoint characteristic for controller switch-off threshold as a function of the speed
F9FA8-idem
F9FDE-[b]idem[/b]
D9E0A Torque Limiter
D9BFC-not

More TL
D9E06 size21x1
DF9FE-max imput torque at gearbox on idle
DFA28,DFA52,DFA7C,DFAA6,DFAD0,DFAFA,torque limiter/gear(from 1 to 6th gear)size 10x1
DFB24 torque limiter/Reverse gear.size 10x1

by **Aladinnu** » Sun Sep 22, 2019 11:43 pm

Only EDC17 has TL for each Gear. check ur info ;) and..btw .who needs TL for reverse gear ? ;)

by **adriancl** » Mon Sep 23, 2019 5:22 pm

Aladinnu wrote:Only EDC17 has TL for each Gear. check ur info ;) and..btw .who needs TL for reverse gear ? ;)

wrong mate, this EDC16CP35 have TL/gear.If don't touch this maps, car will be limited at 500Nm.

by **gago9999** » Sat May 27, 2023 9:09 pm

Hi, adjusting all tq lim maps (both in inner torque, gear, etc) and driver wish I don't get above 492 Nm. The are aI'm intereste din is 2000-2750 to increase it to 520 from 500 Nm.
Car is BMW e60, 530D, 235cp, 500 Nm, EDC16CP35.
Any help would be appreciated. bin files attached (staring point and final, in the starting point one there are some other mods and the cal is slightly different from the original one).