Help with VW Golf 1.9TDI PD 105KM

by **Karramba** » Sun Feb 24, 2013 10:21 pm

Hello,
VW Golf 1.9TDI PD 105KM 03G906016CC 0281011832 371093 no DPF.
I find two maps that I have no idea what they means. I think that the first map is from boost in mbar and one axe is torque in Nm but I can't find data for the second one. The second map I have no idea what is for. Thank You for any help.

by **dvisko** » Mon Feb 25, 2013 2:00 am

Hi! Here are all maps u need for car i think.

$D1A3C;"Drivers Wish 1";"8x16"
$D1B3C;"Drivers Wish 2";"8x16"
$D1D3C;"Drivers Wish 4";"8x16"
$D1C3C;"Drivers Wish 3";"8x16"
$D1E3C;"Drivers Wish 5";"8x16"
$D1F3C;"Drivers Wish 6";"8x16"
$D203C;"Drivers Wish 7";"8x16"
$EFFD4;"Inverse Drivers Wish 1";"16x12"
$DF75A;"Smoke Limiter - MAF";"13x16"
$E88A4;"Injection Duration 1";"15x19"
$E8B26;"Injection Duration 2";"15x19"
$E8DA8;"Injection Duration 3";"15x19"
$E902A;"Injection Duration 4";"15x19"
$ECEB8;"N75";"13x16"
$EDCAC;"Desired Boost";"10x16"
$EDE18;"Boost Limiter - Atmospheric Pressure";"10x10"
$D3B8C;"EGR";"13x16"
$F0750;"Starting Torque 1";"9x9"
$F082E;"Starting Torque 2";"9x9"
$DDD78;"Torque Limiter";"20x3"
$EDF64;"SVBL";"1x1"
$E060A;"Torque To IQ Conversion";"16x15"
$DFA14;"Smoke Limiter - MAP";"11x16"
$E8794;"Injection Duration 0";"10x10"
$E1FBA;"Start Of Injection 0";"14x16"
$E217A;"Start Of Injection 1";"14x16"
$E233A;"Start Of Injection 2";"14x16"
$E24FA;"Start Of Injection 3";"14x16"
$E26BA;"Start Of Injection 4";"14x16"
$E287C;"Start Of Injection 5";"14x16"
$E2A3C;"Start Of Injection 6";"14x16"
$E2BFA;"Start Of Injection 7";"14x16"
$E2DBA;"Start Of Injection 8";"14x16"
$E2F7A;"Start Of Injection 9";"14x16"
$E3190;"Start Of Injection Switch";"10x1"
$DF5DC;"Boost Pressure Correction - Ait Temp";"10x16"
$E3AF0;"Start Of Injection Limiter - Water Temp";"11x14"
$F025A;"Inverse Drivers Wish 2";"16x12"
$EDF94;"Turbo Limiter 1";"10x10"
$E9290;"Injection Duration 5";"10x10"
$E875C;"Injection Duration Switch";"6x1"
$EE088;"Turbo Limiter 2";"10x10"
$EE17C;"Turbo Limiter 3";"10x10"
$EE270;"Turbo Limiter 4";"10x10"
$DFD34;"Lambda 0";"13x16"
$DFF12;"Lambda 1";"13x16"
$E00F0;"Lambda 2";"13x16"
$E0298;"Lambda Switch";"3x1"
$E31A4;"Start Of Injection Limiter - Fuel Temp";"14x16"
$E3AB0;"Start Of Injection Limiter - Fuel Temp Switch";"5x1"

First find all maps then start changing parameters.

by **caralarmz** » Mon Feb 25, 2013 7:01 pm

hi there, if you still struggle after the above maybe try edc suite, ex tool for beginners / experts alike.

by **Karramba** » Mon Feb 25, 2013 11:45 pm

Thank You Dvisko. When I'll have some time I'll check it and post what I figure out :)

by **sf777** » Thu Jun 20, 2013 12:34 pm

thx very good

by **Andrei** » Sat Dec 12, 2015 2:07 am

Hello Guys,

Here are the five EGR Hysteresis Maps each 20 values long with no axis.

0D51FA; Hysteresis 1
0D524C Hysteresis 2
0D529E Hysteresis 3
0D52F0 Hysteresis 4
0D5342 Hysteresis 5

Set values of Hysteresis 2 and 5 to "00000" to shut down the EGR function
and not trigger an error code, by modifying the EGR Map (0D3B8C).

Changing the Hysteresis Values does not require modification in the EGR MAP.

Best wishes to everybody!