IQ Limit EDC15VM 2.5TDI

by **mineff** » Thu Jul 30, 2020 1:55 pm

Nice Job!

by **ado_89** » Sun Oct 18, 2020 8:18 pm

Hello expert's

I have an BFC from A6 C5 audi, 163cv.

I moded my setup 100 times, and in VCDS in torque limit I have an 70mg/s.

But I don't feel that power, car goes better but not as ferrari :D :mrgreen:

Here is my ori and moded file, I change only code block 1012 because on that codeblock when I close EGR that work...

Please can you check did I raised correct IQ limiter, becaouse I don't have an good damos for winols and don't have an full program. I have only demo.

by **Jannik07** » Thu Dec 03, 2020 11:49 pm

you got any success ?
Looking for IQ Limiters too in my EDC15 2.5 TDI BAU engine.

by **mineff** » Wed Jan 27, 2021 9:36 am

Look for 65535 50 and 50 65535, change them all..

by **kpytou** » Thu Mar 04, 2021 12:26 am

Hi to all, I'm looking for damos EDC15VM+ 2.5 V6.

ado_89 wrote:Hello expert's

I have an BFC from A6 C5 audi, 163cv.

I moded my setup 100 times, and in VCDS in torque limit I have an 70mg/s.

But I don't feel that power, car goes better but not as ferrari :D :mrgreen:

Here is my ori and moded file, I change only code block 1012 because on that codeblock when I close EGR that work...

Please can you check did I raised correct IQ limiter, becaouse I don't have an good damos for winols and don't have an full program. I have only demo.

by **Jannik07** » Sat Nov 06, 2021 3:11 pm

Hello friends,

Trying to roll up that thread while there are no real news. I changed all the 65535 50 and 50 65535 values to 60 and everything else accordingly but the car does not feel like Lamborghini.

In logs everything works as it shoul (even before these mods) but there is no real improvement. Im running 60mg straight till 3500. 2500mbar boost. I also added some degrees on SOI for the last column. To achieve higher SOI I also raised a SOI limiter by Boost.

I will add my file ori + mod and a Mappack. Maybe there are some other 2.5tdi Guys out here looking for the grail :D

At high RPM I see duration in logs going up to 70 degree CR. Anyone knows what are these values? if it would be the real duration EOI would be around 60 degree ATDC. I dont think that these are real values :D Maybe they are the half of that because of cam to crank ratio?

by **mikicba89** » Mon Aug 28, 2023 11:05 pm

Jannik07 wrote:Hello friends,

Trying to roll up that thread while there are no real news. I changed all the 65535 50 and 50 65535 values to 60 and everything else accordingly but the car does not feel like Lamborghini.

In logs everything works as it shoul (even before these mods) but there is no real improvement. Im running 60mg straight till 3500. 2500mbar boost. I also added some degrees on SOI for the last column. To achieve higher SOI I also raised a SOI limiter by Boost.

I will add my file ori + mod and a Mappack. Maybe there are some other 2.5tdi Guys out here looking for the grail :D

At high RPM I see duration in logs going up to 70 degree CR. Anyone knows what are these values? if it would be the real duration EOI would be around 60 degree ATDC. I dont think that these are real values :D Maybe they are the half of that because of cam to crank ratio?

Hi Jannik07, you have any succes with this? i have the same engine and im trying to get it funnier. but i dont know anything about tdi engines (its my first)

Thanks!