Hi there,

this is my first tuning with the ECU EDC16U1 and also my first tuning with WinOLS, so I think you will discover some errors.

I would ask you to consider the hardware, it is all original but I want to get the maximum performance out of it means maximum torque and maximum horsepower.

Please help me and tell me what i did wronge.

1. SL by MAP - x-axis not extended. That amount of fuel with that boost give You AFR about 13;
2.SL by MAF - the same - AFR about 16.6;
3. EGR main map - leave it stock because You closed EGR by hysteresis maps;
4. DOI maps - try to extend x-axis to desired amount of fuel. Calculate new values for extended column with exel;
5. Boost map - the same as DOI;
6. TQ to IQ conversion map same - extend x axis to desired Nm and calculate new values in map.
7. SOI not touched;
8. Lambda maps untouched also.

Read this link

Hi mate,
I would suggest you to search for the DAMOS files you need for that ECU.
After that and done a bit of research about all topics mentioned up there and some more, you will just know exactly what to do!