❗️PCMflash Days Off❗️

From December 31st to January 3rd, inclusive, no PCMflash activations will be possible. Please plan your purchases accordingly!

PCMflash

⭐️ Happy New Year from ECUTools and news on our working hours and shipping during holidays! ⭐️

We wish you happy New Year and great winter holidays! Thank you so much for choosing us! We appreciate your involvement and wish you all the best today and in the upcoming 2022!

This year was a great step forward for us, as we have kept updating the already present tools and added some new ones.

✅ For your convenience we do work during the winter holidays. The activations will be done as usual, beside PCMflash which will be available for activations after January 3rd. Slight delays are also possible.

As for shipping and delivering the tools, EMS will accept packages on January 3rd, 4th and 6th, whereas DHL will be sending parcels after January 8th.

❗️ Autotuner Update for Bosch ME17.9.52! ❗️

➡️ Bench reading and writing for Bosch ME17.9.52 on Peugeot and Toyota in Autotuner

Autotuner is now able to perform the following operations:

✅ Bench Reading
✅ Bench Writing

On the following ECU:

✅ Bosch ME17.9.52

Vehicles concerned:

✅ Peugeot 1.0i 69hp
✅ Toyota 1.0i 69hp
✅ Toyota 1.0 VVT-i 69hp

Autotuner Master
Autotuner Slave

❗️ KESSv2 Update: Agriculture Vehicles ❗️

✅ KESSv2 allows you to read and write agriculture vehicles via OBD such as Case Ih, New Holland and Steyr, supporting Bosch MD1CE101 ECUs. More than 700 new vehicles available!

➡️ More information here

KESSv2 Master
KESSv2 Slave

❗️ M&D Flasher Pre-Order Licenses! ❗️

✅ License 84- GM Bosch BCM BENCH and Continental BCM BENCH and License 86 - GM ECU Sirius D3/D32/4R/42R/D42/D52 are up for pre-order!

➡️ More information here

License 86
License 84

The activation files will be sent within a week after 22.02.2022

❗️ Two brand new tools: MUT-3 J2534 Driver and Mitsubishi Flasher! ❗️

✅ MUT-3 J2534 Full Driver works with the original software for Mitsubishi MUT3 diagnostics. The driver supports 100% functionality of the original MUT III and MUT III Lite Scanner.

✅ Mitsubishi Flasher is a Mitsubishi ECU programmer for chip tuning and car repairing. The USB dongle is required for working. Reading and writing control units is done via the J2534 adapter.

➡️ More information here

❗️ Autotuner Update! ❗️

➡️ OBD reading and writing for Bosch ME9.0C and Bosch MED17.4 in Autotuner!

✅ Bosch ME9.0 °C: OBD reading/writing

Vehicles concerned: Ford 2.5T 200/220/225hp

✅ Bosch MED17.4: OBD reading/writing

Vehicles concerned: Citroen/DS 1.6 THP 150/156/165/202hp

⭐️ Autotuner Master
⭐️ Autotuner Slave

❗️ FLEX version 6. 4.0.0 released! ❗️

➡️ New Bench Solutions for Bosch SPC58 Control Units in FLEX

Here are some of the supported vehicles:

✅ Suzuki 1.4T BoosterJet 48v 2021
✅ Peugeot 1.2 VTI Puretech 2021
✅ Opel Mokka 1.2 Turbo 2021
✅ Mahindra 2.2 CRDe 2020

The new bench protocol is available for the following software packages:

➡️ FLS0.1 – SW Flex ECU (car, van, bike) OBD + Bench
➡️ FLS0.10 – SW Flex Infineon TC17xx / TCxxx
➡️ FLS0.5 – FULL Flex

New protocols added

✅ Suzuki BOSCH MG1CS026: Read / Write / Checksum Internal Flash; Read / Write Internal Eeprom; Full backup
✅ DS BOSCH MG1CS032: Read / Write / Internal Flash Checksum; Read / Write Internal Eeprom; Full backup
✅ Peugeot BOSCH MG1CS032: Read / Write / Checksum Internal Flash; Read / Write Internal Eeprom; Full backup
✅ Opel BOSCH MG1CS032: Read / Write / Checksum Internal Flash; Read / Write Internal Eeprom; Full backup
✅ Mahindra BOSCH MD1CS018: internal flash read / write / checksum; Read / Write Internal Eeprom; Full backup

Software Improvements

✅ Added support for JLR BOSCH 6HP28 in Bench

Bug fixes

✅ Fixed OBD writing problem for some versions of Porsche AL552
✅ Fixed CRC issue with BOSCH EDC16C39 in Bench

⭐️ FLEX Master
⭐️ FLEX Slave

⭐️❗️ PCMflash Update! ❗️ ⭐️

New modules and additions to the current protocols in PCMflash!

✅ Module 82: Bosch SH725XX TCU Bootloader, designed to work in service mode (on the bench) with Bosch TCUs with SH725xx microcontrollers, available in ZF 8HP, VAG DQ380/381/500, MEG17.9.8, MEG17.9.13, MEG17.9.21, TC60/80. Supports Flash and EEPROM reading, writing, checksum corrections.

✅ Module 83: VAG Bosch DQ380/DQ381/DQ500/ZF 8HP, designed to work via the diagnostic connector with DSG and automatic transmission units used in VAG vehicles. Reading (virtual), writing, checksum corrections.

✅ Module 84: VAG Delphi DCM6.2 supports working via the diagnostic connector of VAG vehicles with Delphi DCM6.2 ECUs. Supports virtual reading, writing, checksum corrections.

✅ Module 85: Ford Gearbox is designed for working via the diagnostic connector with 6HP28, 5R/6R/6 °F/8 °F/10R TCUs of various modifications used in Ford vehicles. Reading, writing and checksum corrections is supported.

➡️ Updates for the existing modules can be found here ⬅️

❗️ New tools in our catalog: DFOX Master and Slave! ❗️

⭐️ DFOX from DFB TECHNOLOGY allows serial communication with the Engine and Automatic transmission control units via the OBD diagnostic socket. It is a professional software for reading and programming the control units of:

✅ Cars
✅ Trucks
✅ Motorbikes
✅ Tractors
✅ Boats
✅ Additional TCU package available for Automatic Transmissions

➡️ It also allows communication in the following modes:

✅ BDM and JTAG
✅ BOOT Mode
✅ BENCH Mode (or Service mode)
✅ FULL SYSTEM via pinout

➡️ Compatible operating systems:

✅ Windows 7
✅ Windows 8/8.1
✅ Windows 10
✅ Windows 11!

➡️ Minimum recommended requirements:
CPU > 2.5 GHz (Intel i5, i7)
RAM > 4GB

The tool has annual subscription, though it is not mandatory for working.

ECUTools are the first and only dealer of DFB TECHNOLOGY in Russia!

➡️ DFOX Master
➡️ DFOX Slave