Hello everyone ,
I have done a stage 1 attempt following vagecumap guides for edc16 and need some help, (https://sites.google.com/site/vagecumap/home)
-Me personally i would have done it different because i dont like to use percentage for tuning( but i wanted to try his way from the guides just to see the final result.)

VW Passat Variant b6
Engine :PD BMP 2.0TDI 16v 140hp.
Target: Want to get more power safely without removing and killing my dpf (18,5afr++) around 170hp 390nM

SW: 1037389874
Engine: R4 2,0L EDC
SW upg.: 03G906021NK 9816


Because im not so used to tuning soi maps i hit a brick wall and need some help.( He didnt quite fully explained this part.)
-So i extrapolated the duration 01 map from 60 to 65 axis.Dur 0 is not being used, Dur 2,3 maps are already at 65mg.
-And i need help with how to advance the soi maps.
-And should i extend SOI axis?
-I know EOI=Soi-duration but i dont know what should be my new BTDC and ATDC(and how to calculate it)
-Also if anything else is wrong im looking forward for critics.
Just have a look at the file and looking forward to finishing this file quickly, and most important to learn!
Attached is (Original(Egr has been removed from prev owner), and Tuned(Vagecumap method) ).
Best Regards,