HELP IMMO REMOVE SEAT IBIZA 6K2 1.9 TDI 66KW

by **Worm1960** » Sat Mar 30, 2013 6:55 pm

HELLO EVERYONE. Friends need your help, how can I remove the immobilizer from my seat ibiza 1.9 tdi 66kw AGR 1999? it is necessary to open the ECU, or cable gives? What cable do I use? Thank you.

by **KillMe3** » Sat Mar 30, 2013 7:04 pm

Dear Worm1960

what kind of ECU you have? Bosch or Siemens an the Nr. please.

by **Worm1960** » Sat Mar 30, 2013 7:20 pm

hello killme , I think this is 038 906 018 EC Bosch

http://www.google.pt/imgres?q=centralin ... =162&ty=71

thanks

by **KillMe3** » Sat Mar 30, 2013 7:49 pm

Dear Worm1960,

like i know you have to read out Data from 24C02 EEPROM.
So i think you have to open your ECU.

For myself im a newbee. So its not guaranteed what i say.

by **Worm1960** » Sun Mar 31, 2013 12:55 am

friend KILLME first and foremost thank you for your attention. And it is not possible to deactivate immo by vag tacho? the softare in question has an option to turn off immo, ie, it is not necessary to open the ECU and remove the eprom.
am I right?

thanks

by **KillMe3** » Sun Mar 31, 2013 1:00 am

Sorry Worm1960
im not able to answer your qeustion, because i dont know whether its possible to do that without opening your ECU.
Maybe its possible but your need the Hardware too to do that. Maybe that Hardware is very expensive.

by **Worm1960** » Mon Apr 01, 2013 6:30 pm

Friend killme, I have to use that software? need to change the eprom for a reprogrammable? Basically I have to copy the original conteuda the eprom and change the data and put everything back to the new correct? parameters that have to change?

thanks ;)

by **Yoshimura** » Mon Apr 01, 2013 8:36 pm

Hi Worm 1960

My advice is, better buy yourself some good programmer like UPA or OMEGA and do it with it. If you by some VAG tool ( VAG ECU TOOL, K+CAN COMMANDER, VAS 5054 or etc.) you will use it only for VAG brands and on some models you won`t be able to do something without reprogramming the EEPROM or MCU.
As I see, your one is EDC 15V, and as KillMe3 said, it is with 24C02. Maybe some of the VAG tools can do it via OBD, but I`m not familiar. The best way - on the table with the programmer and good soft

Regards

by **Worm1960** » Mon Apr 01, 2013 11:20 pm

friend thank you for your attention, what better tool price \ quality?
thanks

by **KillMe3** » Tue Apr 02, 2013 12:14 am

My Programmer:
MCUmall GQ-4X
Expensive but a good one.
But to do that you need experience in Solder- and Desoldering. So you need a Reworkstation too.

Best Regards
KillMe3