Siemens SID 803A

by **sntyad** » Sun Feb 09, 2014 3:22 pm

Testes via OBd on :

PSA SID803/803a/801
Opel Sim71
Daewoo K3
Ford SID802

Only OBD, All ok.

by **arrondo** » Mon Feb 24, 2014 4:27 am

Thanks for the tip!

by **MartinZ** » Wed Dec 03, 2014 10:43 am

I read it with galleto no problem. Writte with galleto no problem. Second writte with kess and brick the ecu :(

by **Mr_Gman** » Fri Jan 16, 2015 4:24 am

MartinZ wrote:I read it with galleto no problem. Writte with galleto no problem. Second writte with kess and brick the ecu :(

Hi!

Could this be a sheer accident? I have read this ECU with Kess clone, tuned and flashed back via OBD and everything was fine.

by **Alex.T** » Sun Jun 14, 2015 9:43 pm

Update:
Bought Galletto v54 and it's ok for SID803A both OBD and BDM.
Just a WARNING though..
Please check the Siemens adapter that comes with Galletto before putting it on the ECU!
I received two siemens adapters and both were bad! The first one had pins 1 and 2 short circuited, and the second one had pins 6 and 7 short circuited.
That is because the copper pads are very little and very close to each other and most of all because they are chinese!
So always check your connections with a multimeter.

by **Essex** » Sun Jul 05, 2015 10:32 am

these ecus are a pig, you can only read by bdm. if you use cmd (genuine) you can get an ori file from their database, make your adjustments and write it through obd.

by **ecuedit** » Sun Jul 05, 2015 10:11 pm

Essex wrote:these ecus are a pig, you can only read by bdm. if you use cmd (genuine) you can get an ori file from their database, make your adjustments and write it through obd.

SID803A can be read via OBD, but SID803 NOT.

by **Essex** » Wed Jul 08, 2015 7:46 pm

ecuedit wrote:
Essex wrote:these ecus are a pig, you can only read by bdm. if you use cmd (genuine) you can get an ori file from their database, make your adjustments and write it through obd.

SID803A can be read via OBD, but SID803 NOT.

Sorry, i was thinking of the SID803