Which ECU programmer is good for EDC17 Tuning

by **Emily** » Sat Dec 21, 2019 4:24 pm

Which ECU programmer is good for EDC17 tuning? Here advice you 5 ECU programmer to choose.

1. Kess V2- most popular
Kess V2 is usually a strong ECU tuner with reasonably priced value. Kess V2 tuning kit covers all major brands and protocols incl. Line, CAN, EDC17, MED17 and Ford J1850. It has some distinguish capabilities that other ECU tuning tool did not have, like Verify in the battery voltage in real-time. Complete recovery function in case ofissues. Automatic correction of the Checksum, Boot-loader mode supported. Management of the programming counters. Scan tool function to remove DTC. Several alternatives of reading/writing speed. Alternative to write full file/section with the map and full integration with ECM Titanium ECU programming software program. The device can not be upgraded and must be installed on Windows XP operating program.

2.FGTECH Galletto 2 master- faster & safest
FGTECH Galletto V50 programmer supports BDM-TriCore-OBD (MPC5xx-EDC17-Infineon TriCore- ST10Fxx- OBD2 (K-CAN) now. The system comes complete with all vehicles, trucks, traktors and bikes with new Boot Mode Program TriCore Infineon Tricore Sak TC1767, new Infineon Tricore sak TC1792, TC1796, TC1797 and TC1767. It may also support study and write new BMW by means of OBD two port. The application could be upgrade through e mail. The dongles has been canceled. You are able to use it freely.

3.MPPS V18- best China knock off
MPPS V18 ECU chip tuning interface support read and create flash for EDC15, EDC16 and EDC17 checksum. MPPS V18 has produced some improvements of EDC15 and DDE4. It has added VAG EDC17 checksum programming function. New cars have been added to MPPS V18. The software program must be installed on Windows XP operating method and can not be upgraded.

4.MPPS V13.02- lowest cost
New MPPS V13.02 chip tuning interface enables to study and write memory in the vehicle laptop by means of the diagnostic connector. MPPS V13.02 supports the newest drivers EDC16, EDC17, MED9x, Siemens PPD1/ x, EDC15, ME7.xi significantly more. It helps flashing reading and writing K+CAN, checksum calculation and make module engine ecu make ecu form connection read create checksum. It’s a standalone ECU chip tuning that work devoid of unnecessary boxes and cables by straight plugged into connector. The software program must be installed on Windows XP2 operating system.

5.DS17 Infineon Tricore Boot Reader-full car listed
DS17 Infineon Tricore Boot Reader help EDC17/MED17/ME17/MEV17/MEVD17/PCF2.1/SD13/SD14/SD16/SID208/SID807 programming. Normally named as bootmode this port maybe the Infineon pendent for the Motorola/ Freescale BDM port. In contrast for the BDM port. Whose pins only have this purpose, the bootmode is carried out over 1 on the CAN buses with the processor. For the reason that new assembled ECUs are programmed over this port. Bosch has put it on a 14 pin pad array. It appears like the BDM port but works completely distinct. The power can also be supplied more than the probe, but is spite to the BDM system, the voltage will not be manually switchable but automatically controlled by the DS17.

What are ECU EDC17 types can be supported?
Car ECU
Manufacturer Type Version Manufacturer Type
Audi A3 2.0L TDI CR Bosch EDC17C46
Audi A4 2.0L TDI CR Bosch EDC17CP14 INTERN
Audi A5 2.0L TDI CR Bosch EDC17CP20 HW31
Audi A5 3.0L V6 TDI Bosch EDC17CP14 HW02
Audi A6 2.7L V6 TDI Bosch EDC17CP14 EXTERN
Audi Q5 3.0L V6 TDI Bosch EDC17CP24
Audi Q7 3.0L TDI Bosch EDC17CP04 HW01
Audi Q7 4.2L V8 TD I Bosch EDC17CP24
BMW 118d (E81) 2.0 LD Bosch EDC17C06 DDE7.0
BMW 120d (E81) 2.0 LD Bosch EDC17CP02 DDE7.1
BMW 120d (E82) 2.0 LD Bosch EDC17CP02 DDE7.1
BMW 120d (E88) 2.0 LD Bosch EDC17CP02 DDE7.1
BMW 123d (E81) 2.0 LD Bosch EDC17CP02 DDE7.1
BMW 123d (E82) 2.0 LD Bosch EDC17CP02 DDE7.1
BMW 318d (E90) 2.0 LD Bosch EDC17C06 DDE7.0
BMW 318d (E91) 2.0 LD Bosch EDC17C06 DDE7.0
BMW 320d (E90) 2.0 LD Bosch EDC17CP02 DDE7.1
BMW 320d (E91) 2.0 LD Bosch EDC17CP02 DDE7.1
BMW 320d (E92) 2.0 LD Bosch EDC17CP02 DDE7.1
BMW 320d (E93) 2.0 LD Bosch EDC17CP02 DDE7.1
BMW 325d (E93) 2.5 LD Bosch EDC17CP09 DDE7.3
BMW 330d (E91) 3.0 LD Bosch EDC17CP09 DDE7.3
BMW 535D (F11) 3.0 LD Bosch EDC17C41
BMW 535GT (F07) 3.0 LD Bosch EDC17CP09 DDE7.3
BMW X1(E84) 1.8 LD Bosch EDC17C06 DDE7.0
BMW X3(E83) Facelift 2.0 LD Bosch EDC17CP02 DDE7.1
BMW X6(E71) 4.0 LD Bosch EDC17CP45

LINK REMOVED BY MODERATOR

by **Pukis** » Sat Dec 21, 2019 9:36 pm

Hi Mate, hope you talking not about china clones? :) As far as i know Bflash and Autotuner quite good.

by **Emily** » Sun Dec 22, 2019 6:40 am

Pukis wrote:Hi Mate, hope you talking not about china clones? :) As far as i know Bflash and Autotuner quite good.

Thanks for your advice.

by **jurebv** » Sun Dec 22, 2019 10:25 am

Users of this site have to respect that posting torrent, cracks, keys, serials, links to any pirate sites is not allowed.

quote from Rules : rules-ver-1-0-t12

by **Lambda1** » Fri Jan 10, 2020 5:27 pm

Ive got bFlash, Kess and KTag Mastertools, also knowledge about PCMFlash and MPPS so if you want which I could recommend of them ask because every Tool has advantages and disadvantages.

by **Pukis** » Fri Jan 10, 2020 5:56 pm

Lambda1 wrote:Ive got bFlash, Kess and KTag Mastertools, also knowledge about PCMFlash and MPPS so if you want which I could recommend of them ask because every Tool has advantages and disadvantages.

Hi mate - what impressions about bFlash?

by **Lambda1** » Fri Jan 10, 2020 7:48 pm

Good tool, good support. Nice feautures.
Maybe can get my hands on a autotuner for direct comparements.

by **Sharino** » Wed Jan 29, 2020 6:40 pm

Can somebody tell me advantage of using bFlash or any other product over Kess?

by **Lambda1** » Wed Jan 29, 2020 7:35 pm

Mhm, quicker update, good support, logging feature, bTrace PlugIn to connect to WinOls and Track and Trace ;).
Much faster id, read, write than Kess.
Kess works with many cars, also old onces like edc15...
BFlash begins with some EDC16, MSD80... so ~ Cars building up until 2006.

by **mike80cz** » Sat Feb 15, 2020 1:03 pm

I use CMD, Kess, Ktag, Magic, Flex, VF2. I have not Autotuner, but I think about it, becouse has got lots of cars as first. But usually other companies are able to add new cars fast too. Im using mostly CMD, becouse is fast and very safe. Kess is not so userfriendly, take more time to download the file, you must still switch on/off, several times before reading the file. Then you must go to save file on the end of reading. But of course most important is car list :)