A3 1.9 tdi BLS EGR off

Posts related to switching of the EGR.
Post a reply

Return to EGR Off

A3 1.9 tdi BLS EGR off

Postby Franky_D » Fri Dec 20, 2019 10:26 am

Hello,

Can someone please check the corrected file - EGR hysteresis adjusted?
- are the changes done correctly?
- is the checksum correct?

I've used the following as instruction: http://www.ecuedit.com/edc16-golf-v-105hp-egr-map-t1012

The instruction suggests to leave address 1C700E (for my case) unchanged. Is it correct, or should it also be zero-ed?

What is the right way to deal with checksum? Let WinOLS re-calculate? Let VCP pro re-calculate during upload (if it is doing it)? Do it manually? IF someone can point me to guides on checksum - would greatly appreciate.

Thanks a million! :thumbup:


Thank you!
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

Franky_D
New user
 
Posts: 2
Joined: Sun Dec 08, 2019 10:09 pm
Location: Denmark

Re: A3 1.9 tdi BLS EGR off

Postby cipitari » Fri May 08, 2020 6:52 pm

Franky_D wrote:Hello,

Can someone please check the corrected file - EGR hysteresis adjusted?
- are the changes done correctly?
- is the checksum correct?

I've used the following as instruction: http://www.ecuedit.com/edc16-golf-v-105hp-egr-map-t1012

The instruction suggests to leave address 1C700E (for my case) unchanged. Is it correct, or should it also be zero-ed?

What is the right way to deal with checksum? Let WinOLS re-calculate? Let VCP pro re-calculate during upload (if it is doing it)? Do it manually? IF someone can point me to guides on checksum - would greatly appreciate.

Thanks a million! :thumbup:


Thank you!





it's good ! good luck ;)

cipitari
New user
 
Posts: 17
Joined: Tue Aug 08, 2017 9:03 pm
Location: România

Re: A3 1.9 tdi BLS EGR off

Postby telefan » Fri Aug 21, 2020 12:50 am

Franky_D wrote:Hello,

Can someone please check the corrected file - EGR hysteresis adjusted?
- are the changes done correctly?
- is the checksum correct?

I've used the following as instruction: http://www.ecuedit.com/edc16-golf-v-105hp-egr-map-t1012

The instruction suggests to leave address 1C700E (for my case) unchanged. Is it correct, or should it also be zero-ed?

What is the right way to deal with checksum? Let WinOLS re-calculate? Let VCP pro re-calculate during upload (if it is doing it)? Do it manually? IF someone can point me to guides on checksum - would greatly appreciate.

Thanks a million! :thumbup:

Files for you.


Thank you!
You do not have permissions to view the files yet. You have to be registered and you have to make at least 3 quality / unique posts.

telefan
New user
 
Posts: 6
Joined: Tue Jul 21, 2020 10:56 am
Location: Poland
Post a reply

Return to EGR Off

Who is online

Users browsing this forum: No registered users and 0 guests