Advice on ECU Programming

by **meestaeimaj** » Sun Sep 09, 2012 8:24 pm

Hi,

I'm just wondering if anyone could offer advice on the equipment and software required to virginise a Citroen Siemens SID 802 style ECU (i.e. to unlock) ?

Kind Regards

by **OdinEidolon** » Sun Sep 09, 2012 8:37 pm

You need to access it via BDM or you can use the - expensive - KESS.
I have heard of an original Galletto-made interface supporting it (found evidence of this on the new), but did not find it.

by **meestaeimaj** » Sun Sep 09, 2012 8:47 pm

Hi - would the BDM100 programmer do this (I notice it's pretty inexpensive) ? Also, where would you find virgin dumps to write to ECU - or can it just be written over with (FFFFF etc) ?

Thanks for your help - it's very much appreciated.

by **colgate** » Wed Oct 10, 2012 4:40 pm

better way found ho now`s what are doing and put virgin you`r ecu don`t play you can kill the ecu with chiness bdm and no way to put FFFFF you have to now where and what to put there !

by **tihiuvek** » Thu Oct 11, 2012 7:58 am

If you will read with BDM - first do the full backup of ECU, then read separate eeprom and flash.
Post the dumps here and we will help you.

by **Nrady** » Tue Apr 30, 2013 5:15 am

Does BDM can support the newer generation car like Ford 2012 Ranger 3.2L TDCI ?
Please you advise the proper hard ware for Write/Read ECU on this model. Thanks

by **thesnowman** » Mon May 06, 2013 2:05 am

Nrady wrote:Does BDM can support the newer generation car like Ford 2012 Ranger 3.2L TDCI ?
Please you advise the proper hard ware for Write/Read ECU on this model. Thanks

Its tricore antitune :)