Hello,
Flushed this mod (EGR OFF & Hot start map fix) post12527#p12527 with MPPS 12.0.0.6
Connected external power supply to acc. Used slow speed.
Operation finished successfully.
Engine starts OK. Did test drive, everything looks OK. No errors in engine via VCDS.
Tried to read again (just for verification), MPPS hans up with message "security access" on reading ...
CPU id - is OK.
I didn't try to write it (scared a little bit).
What i did wrong? Any help appreciated. Thanks.

Fixed! Switched on key for 30 mins, afterwards can read (din't try to write yet).
Respect to user jonixins from ecuconnections forum.

I have the same problem in golf IV 1.9tdi 66kw. In my file was done the checksum with mpps was finde the 4 sectors and had done 0 corections but then I written it to the car the car don't start, my vag(VCDS) don't find any of blocks of engine just write on the top "kW:6B8F" not some of kw but writen the bits. Also my mpps write to me the security acces is wrong.

binde wrote:I have the same problem in golf IV 1.9tdi 66kw. In my file was done the checksum with mpps was finde the 4 sectors and had done 0 corections but then I written it to the car the car don't start, my vag(VCDS) don't find any of blocks of engine just write on the top "kW:6B8F" not some of kw but writen the bits. Also my mpps write to me the security acces is wrong.

If your file needed a chksum correction and you didn't make it before flash it, it's normal that the ECU do no respond properly. Try
to recover it with bootmode with a fresh ORI file.

if you flash your ecu with diffrent hw & sw you could lock your ecu too but car would still start but he will not let you to read the file...

binde wrote:I have the same problem in golf IV 1.9tdi 66kw. In my file was done the checksum with mpps was finde the 4 sectors and had done 0 corections but then I written it to the car the car don't start, my vag(VCDS) don't find any of blocks of engine just write on the top "kW:6B8F" not some of kw but writen the bits. Also my mpps write to me the security acces is wrong.

you have solution?
my ford galaxy 1.9 tdi same problem i search to internet and no suliton....
perfect read& write ori file but the car not start.

2005 Golf TDI BEW
Address 01: Engine Labels: 038-906-016-BEW.lbl
Part No SW: 038 906 016 Q HW: 028 101 181 2
Component: R4 1,9L EDC G000AG 6110
Revision: 12345678 Serial number: VWZ7Z0D0367493
Coding: 0150034
Shop #: WSC 00001 785 00200
VCID: 224B5219FE43593159F-5124


Car came with "RocketChip" tune.
I read the file with MPPS and saved.
Wanted to install stock tune.

Writing stopped at 49%
Tried again. Same.
Error "conditions not right"

Change MPPS speed settings, same.

When trying to write the (just read and saved the file with MPPS) "rocketchip' file, it fail with 'hardware error'.

http://i1273.photobucket.com/albums/y407/KraftwerkTurbo/2005%20Golf%20TDI%20blown%20turbo/MPPS%20stock%20tune%20writing%20error%201_zpsompxntaz.png

I have the same problem with my Ford Galaxy and the problem is solved if you lower the speed of the read or write.
In my case my laptop is HP probook 4520s I3 wich i think is to fast for this.
I try find something like Eepc to do the job.

RM