ME7.5 Bootmode

Posts relating to recovering blocked ECUs
Post a reply

Return to Recovering ECU

ME7.5 Bootmode

Postby Glospower » Wed Aug 21, 2013 2:28 pm

Hi all, I have an issue with Seat Leon 1800 T 180bhp, Bosch ME7.5. The car has a Revo tune on it, I need to remove it, I know this can be done by bootmode but do not know how to use bootmode, I have a lead made up I can directly connect up to the ecu but understand I need to open the ECU up and soldier one wire on somewhere. Any ideas?

Glospower
New user
 
Posts: 18
Joined: Wed Aug 15, 2012 9:10 pm
Location: Cheltenham

Re: ME7.5 Bootmode

Postby mahome » Thu Aug 22, 2013 5:46 am

If you have seed key auth ，you could do that by OBD port and don't need remove the cover of the ECU.

mahome
New user
 
Posts: 4
Joined: Thu Aug 22, 2013 5:24 am
Location: china

Re: ME7.5 Bootmode

Postby roet » Thu Aug 22, 2013 3:57 pm

Fastest and most simple way is desolder it, bootloader don't work good in all ME7 vag.

roet
 

Re: ME7.5 Bootmode

Postby powerchip.se » Tue Aug 27, 2013 5:47 am

revo is doing something in the eeprom ! Bootmode doesnt work !
you must read the flash and the eeprom and than post it ! via soldering ! :angel:

powerchip.se
New user
 
Posts: 6
Joined: Mon Aug 26, 2013 8:07 am
Location: germany / schweden
Post a reply

Return to Recovering ECU

Who is online

Users browsing this forum: No registered users and 1 guest