which hardware is the best for EDC16

by **Mr_Gman** » Tue Sep 17, 2013 8:10 am

cct wrote:I use MPPS V12 and Galletto V51, and both support this ECU, and you can programed directly thrue OBD. :thumbup:

I have a kessV2 and my ECU is EDC16CP39. It works absolutely perfect. Recovery mode too. I know because I tried to flash with an old file from before the ECU was upgraded and the motor was completely dead, but recoverymode fixed my mistake. The China pusher claims that this version do not locks after 30 or 50 times of use, but after 500. Well, time will show!

by **cct** » Mon Sep 23, 2013 2:36 pm

Mr_Gman wrote:
cct wrote:I use MPPS V12 and Galletto V51, and both support this ECU, and you can programed directly thrue OBD. :thumbup:

I have a kessV2 and my ECU is EDC16CP39. It works absolutely perfect. Recovery mode too. I know because I tried to flash with an old file from before the ECU was upgraded and the motor was completely dead, but recoverymode fixed my mistake. The China pusher claims that this version do not locks after 30 or 50 times of use, but after 500. Well, time will show!

Can you post the link of the KESS V2 where you bought. Because Im interested on buying this tool.

by **fabio.n73** » Sun Oct 13, 2013 4:56 pm

zoro1 wrote:safe way for edc16 is bdm100 or galleto 2 bdm.
MPPS have problem with 16c34 ford,peugeot ,works good with vag\original\

I have MPPS 3 and is ok with edc16c34, only problem whit edc16cp A6 3.0TDI in writing.

by **Jonnyfresh** » Mon Oct 28, 2013 9:33 pm

I have used mpps sucessfully.

by **jorjelut** » Wed Oct 30, 2013 12:27 am

Also used MPPS V13 clone without problems.

by **ajt** » Thu Nov 17, 2016 2:47 pm

fabio.n73 wrote:
zoro1 wrote:safe way for edc16 is bdm100 or galleto 2 bdm.
MPPS have problem with 16c34 ford,peugeot ,works good with vag\original\

I have MPPS 3 and is ok with edc16c34, only problem whit edc16cp A6 3.0TDI in writing.

So have you used it on a Ford, Zoro states it does not work for Ford?

All these people saying "I've used it successfully", but not saying on what?

by **zoro1** » Thu Jun 28, 2018 12:53 pm

MPPs v13 is writting wrong codes for injector in eeprom -therefor you need recode with ids or elm 327.EDC16 adm all mpc 555 556 on BDM!It is safe for work!