Dear all

I am struggling to find a PICTURED way to read out my ECU's.

I have WINOLS, and i started a new project and still, the EEPROM "button" is not active.

My questions are:
- Can someone tell me what i have to do to read out an ECU?
- Is there a guide where i can see which EDCnn i have?

ECUs:
Octavia, 1.9 TDI AHF, VP37, EDC15 i guess?!
Volvo S80, D5, 205PS
Volvo XC60, D5, 205PS

Many thanks to all of you!

Regards
Brani

I think that the only way to readd your ECU from WinOLS is by BDM programator. You can use BDM100 programator with BDM holder and with free software from EVC (BdmToGo). But that means that you have to put out ECU-s ang give them on bench table and do the read-write mode in that kind of way. I think that isn´t possible to do the read-write procedure in WinOLS thru the OBD, this is as far as I know. But if you want to read bin files thru OBD, than you can use several different tools , like for example MPPS, Galletto, KESS V2..., the last two are as I think the best two most common tools that are in use by the most of the guys.

Thanks

Thank you CCT for Reply!

Will check what i can do:)

All the best

Regards

thanks

thanks

thx