Golf 4 1.9 115, my first mod file ;)

by **rowly747** » Wed Jun 26, 2013 3:06 pm

How is your file coming on. You running it on your car?

by **mmx** » Thu Jun 27, 2013 8:00 am

dean21b wrote:Hi, any suggestions are welcome...

- rowly747, yes,it is a few mistakes, :crazy:

- the smoke map axis column are 10000=1000, not 104.2 and yes it supposed to be a 1042 from my calculation, but I left it untouch.

- in N75 map, it was a tipping mistake, it have to be 338`6,not 6`338

- in a smoke map,value 61.3 in 900mg air,are somehow copied from the right column you see value are the same with the right column value.

- back to smoke and turbo map. turbo map was raised to 2.2 just to test it. :roll:
So if we now calculate 474 x 2.2 bar = "1042" then 1042/17 afr = 61.3 (from smoke map)

- in boost limiter map, there is a some mistake :( , like you say value must to go little bit higher that I make it, to prevent over boost swings.

TWEmotorsport
- like you see it was a not so very bad file, same maps missing cause I dont want to touch them
drivers wish,duration,soi...

at last,calculation was made from pdf file edc15, thanks to Midas.

Thanks for your suggestions :thumbup:

Yea you made a few mistakes, first understand that: driver wish issues command its passed on the smoke and torque limiters, if driver's wish command exceeds any of the limiter's value, the limited value will be passed, so you raise torque limiter to 60mn, but smoke limiter cuts it to 50mg, so 50mg will be passed. Pay attention you have more databanks in the file, unless you know witch one your ecu is using you must change them all. I see you modded smoke limiter of one databank, and nothing else, and on the other databank you modded almost all, except smoke limiter :). N75 is wrong, should be changed after you logged the car and see if and where over boost occures. I see injection timing map are calibrated up to 65mg, unless you exceed 65mg, you dont need to touch them. You can check Start of injection maps, and see where are they calibrated to and if needed is indicated to change them as well