Audi A6 2006 2.0TDi BRE EGR Delete, Hot Start Map

by **sam2k01** » Mon Dec 16, 2013 10:26 pm

Hi if anyone can help adjusting my map to perform a EGR Delete, Hot Start Map and increase the economy of my car would be GREAT!!! Any help would be much appreciated. I just read the file with MPPS, saved it and compressed to .RAR. Also the MAF was off during this read if that makes any difference. MAF was off because of EGR Blanking plate causing car to go Limp mode, removing the MAF seems to temporarily fix the situation until I map it out.

Original file attached.

Many Thanks.

by **sam2k01** » Mon Dec 16, 2013 10:52 pm

Forgot to mention its an Auto

by **sinan33** » Mon Dec 23, 2013 2:13 pm

sam2k01 wrote:Hi if anyone can help adjusting my map to perform a EGR Delete, Hot Start Map and increase the economy of my car would be GREAT!!! Any help would be much appreciated. I just read the file with MPPS, saved it and compressed to .RAR. Also the MAF was off during this read if that makes any difference. MAF was off because of EGR Blanking plate causing car to go Limp mode, removing the MAF seems to temporarily fix the situation until I map it out.

Original file attached.

Many Thanks.

Hi!
This is your file.

Code: Select all: http://speedy.sh/8AVhJ/Audi-EGR-off-Hotstart

by **Gergi** » Tue Dec 24, 2013 3:58 pm

sinan33 wrote:
sam2k01 wrote:Hi if anyone can help adjusting my map to perform a EGR Delete, Hot Start Map and increase the economy of my car would be GREAT!!! Any help would be much appreciated. I just read the file with MPPS, saved it and compressed to .RAR. Also the MAF was off during this read if that makes any difference. MAF was off because of EGR Blanking plate causing car to go Limp mode, removing the MAF seems to temporarily fix the situation until I map it out.

Original file attached.

Many Thanks.

Hi!
This is your file.

Code: Select all
http://speedy.sh/8AVhJ/Audi-EGR-off-Hotstart

in this file is no EGR blocked ;)

by **sinan33** » Tue Dec 24, 2013 9:20 pm

I will check and correct it asap.

by **sinan33** » Tue Dec 24, 2013 9:39 pm

Here is the new file.

Code: Select all: http://speedy.sh/3S8ru/03G906016GC-EDC16u31-KLineCan-2.0TDI-140-EGRoff-hotstart

by **abc-tuning** » Tue Dec 24, 2013 10:00 pm

Poor tuning Hot/Cold start map for Automatic/Manual Gearbox

I am sure he have manual gearbox so you dont need to touch both maps!
Mostly 2.0 TDI engines have problems with Hot Start but when was engine Cold or lower then 50°C they start with no problems so you dont need to adjust entire map but only where you car have problems with start up

by **Gergi** » Wed Dec 25, 2013 8:36 am

sinan33 wrote:Here is the new file.

Code: Select all
http://speedy.sh/3S8ru/03G906016GC-EDC16u31-KLineCan-2.0TDI-140-EGRoff-hotstart

now is it off.. but you dont need to touch the complete start map for hot start fix i think ;)

by **sinan33** » Thu Dec 26, 2013 6:12 pm

Gergi wrote:
sinan33 wrote:Here is the new file.

Code: Select all
http://speedy.sh/3S8ru/03G906016GC-EDC16u31-KLineCan-2.0TDI-140-EGRoff-hotstart

now is it off.. but you dont need to touch the complete start map for hot start fix i think ;)

Thank you for your suggestions my friend.
I will be very appreciated to learn such advanced informations about ecu tuning.
Thanks your effort and time.