Peugeot 207 1.6HDi90 EDC16C34 (379395)

by **sparco** » Tue Dec 31, 2013 4:33 pm

Mon Dec 09, 2013
Version 8 was derived form Version 7 (TESTED and runs well, no hint of smoke, good pickup, no vibrations)
After watching the guide videos posted by Daft Duck, I gave it another shot.
I tried it before, but never managed to do anything usefull and now I did.
Please find excell sheet attached.
I added 53mg/R x-axis description on the Railpressure Maps and Boost Maps, Smoothened out the bump in the boostmaps, Lowered the Lambda Map across the range and added a 1000mg MAF axis description.
Also in this specific file, I tested out popcorn rev limiter at 4250 RPM and it worked :D , but only in neutral and when the engine is relatively cold :?

by **sparco** » Tue Dec 31, 2013 4:34 pm

Mon Dec 09, 2013
Version 9 was derived from Version 8 (NOT TESTED YET ;) )
Since I didn't have a hint of smoke in Version 8, I figured I could try to push it a bit harder :roll:

Increased Drivers Wish Map up to 320Nm @ 100%
Increased the Torque Limiter to 310Nm @ 2250RPM
Lowered lambda even more (AFR=17.2 please see previous excell sheet)
Extended 4 out of 5 NM to IQ Conversion Maps using the 1st one as an example
Upped the Boost to 2500mBar @ 2000RPM (Also upped Boost f(Temp) Boost (pATM) and SVBL)
Added an x-axis descriptor up to 58mg/R
Upped the Railpressure Maps in a slightly larger area up to 1750Bar and also added the 58mg/R

by **sparco** » Tue Dec 31, 2013 4:37 pm

Here you can find map pack, OLS project and .XLS(shortened version) mappack so far

Just found a some small error in description of N75 maps should put this in as
N75 Duty Cycle
%
factor 0.012207
and precision 1

by **sparco** » Sun Jan 05, 2014 1:13 am

Couple of downloads and views so far... no comments yet :?

by **kwempe** » Mon Jan 06, 2014 12:01 am

I've been reading your posts and looking at your maps but as Im only just starting out with EDC 16, I have felt unqualified to comment. I wonder if it is because of the relative rarity of your car that nobody else has commented yet? What exact spec and full ecu number is your car because I have a friend with a 2006 207 hdi, 1.6, 90 and he might be interested in being a guinnie pig tester that I could try one of your maps on. Would I need to reset fault codes etc if I were to try with Galletto or MPPS? I have probably remapped my own car around 100 times by now by the way...
My thing is EDC 15 and the VW TDI, PD 1.9 diesel at the moment, although I have sucessfully remapped a friends VW transporter (non PD) with a file I modified, so whilst I can see similarities I will need to read, read and read some more before I reach any standard with which I could comment any more than seeing how a car behaves with a file applied to it.
Keep up the good work though, I'm sure there are lurkers that are reading too but have probably now commented for the same reasons as I..... :)

by **sparco** » Mon Jan 27, 2014 6:24 pm

Hey just wanted to share this around, as I am kind of proud I did this myself ;)
Got some help along the way by some internetposts from pro_steve and TB I found...
So thanks to both of you and especially pro_steve, who gave me the final confirmation...

http://youtu.be/jQ_Ry63UK0c

http://youtu.be/UL8at0QjMt0

by **sparco** » Mon Jan 27, 2014 11:27 pm

Just to confirm, my latest mod is running 1750Bar FRP without a glitch :thumbup:
http://i237.photobucket.com/albums/ff101/Ronke001/ECU%20Tuning/PRail3rdand4thWOT.jpg

by **sparco** » Mon Jan 27, 2014 11:44 pm

Oh and just a little rant again, I deleted all of the files, mappacks and datasheets I made in the past year or so, as I was sick and tired of the leaches sucking it all in, without ever giving anything back, unfortunately I decided it won't happen again... :cry:

by **Adrish33** » Sat Feb 01, 2014 3:13 am

Hey sparco :wave:

I just download the fist zip with the map pack and it's not very good :oops:

I guess you found many other limiters if you are able to help me on others forums :mrgreen:

The maps are exactly the same on the C4 HDi 110 :thumbup:

What is you last version? v8.0? Can i see it? (i'll don't steal, i promise :angel: )

by **sparco** » Mon Feb 03, 2014 7:11 pm

Last version is currently 9.2 on the car...
V10 is ready :D
I deleted them on all forums I joined, as there really was no point in keeping them online any more :cry:
They got downloaded over 100 times per version on various forums, but I never got any feedback, I was sick and tired of it...
I have found everything I know myself, from reading, studying and asking the right questions from time to time, over the course of years (5 years now, for this one ECU)...
I don't mind helping newbies, but I only do it in person now, I won't give away any freebies to the newbies any more ;)
It's just my principle now, been the nice guy for far too long...
And you are right, don't base yourself on those files, I kept them online, as they don't matter and are completely wrong in so many ways, but it's jjust to show how I started out ;)