BMW E46 320d First MOD

by **fake91** » Sun Sep 02, 2012 12:27 pm

Hello i hope somebody will help me and have a look for my tune.
Excuse my english i´m from germany. :D

Thanks!

by **fake91** » Fri Sep 07, 2012 12:01 am

Nobody have time to look for my first MOD :(

by **ecuedit** » Fri Sep 07, 2012 12:40 am

Hello,
you did not post your original file in original file section:
orginal-ecu-files

Also when you uploaded your attachment you did not take few seconds to make your data compete,
so if someone is ready to help you has to look for data of your vehicle...and that takes time,
i think no body likes that.

If you ask for help than you have prepare your data that way that people can help you easily,
that they do not have to look for data you did not provide.

Uploads are prepared that way that you have to enter data, not to put spaces,
it has its meaning...

by **fake91** » Fri Sep 07, 2012 12:21 pm

ok excuse me please

i have now uploaded the file in the section but i dont know the HW and SW number

regards

by **Chris16v** » Fri Sep 07, 2012 5:41 pm

Hi use bosch hw/sw program or you can find it in winols... or any other soft/hardware to mod cars like galetto, kwp, mps...... :)

by **fake91** » Fri Sep 07, 2012 7:19 pm

Thank you very much i will have a look for it and post it now if find :D

by **RPM freak** » Sat Sep 08, 2012 6:17 pm

Very bad file. If tuning is made just by increasing all the maps by 7% and all torque limiters by 25% then you are master tuner.
You increased TL to 65mg/stroke but you Drivers Wish maps is set max at 56mg/stroke. :oops:
Your boost limiter by Atmospheric Pressure is set max at 1.36bars but your SVBL is set at 1.35. :?:
You need to tune few more maps to achieve good hp.

p.s. do not use this file in your car.

by **fake91** » Sun Sep 09, 2012 1:50 am

:oops: ok thats my first tune and i want to learn more hehe

i will correct the values
i want to make it better which maps must i tune for a stock tuning by this engine?
Is 65mg IQ to much?
how can i increase the torque limiter? at first low (10-15%) and then increase to 25% ?
how much tolerance do you add to SVBL? 0,1?
can somebody explain me vp44 map?

thank you!!!! you helped me very much :)

by **RPM freak** » Sun Sep 09, 2012 10:59 am

You can tune SOI map - there is some power and economy in that map.
65mg IQ is almost the max of the pump.
TL you can mod in a way that it will not make clutch plate slip or shake.
SVBL must be the highest value of boost.
VP44 is injection duration map.

by **fake91** » Sun Sep 09, 2012 12:47 pm

Hello friends

now i have mod new: driver wish, smokelimiter, SVBL, Turbolimiter, Torque limiter and i hope it will be a little bit better
there are 2 driver wish maps. do i have to change both or only one map?
my problem is that i don´t now how to change soi and vp44 map. i mod the vp44 map and i hope it is right.

you are very helpfull :D regards