Peugeot 206 2.0 hdi - limiters

by **isdeekelis** » Fri Jan 31, 2014 7:49 am

joao_d_e wrote:1- In temperature limiters, x axis is 3531 3571 3601 ...3713 (location is 7792E) . what is that?

This is degrees in farengheit X10. 3531/10-273=80 degrees celsius ;)

by **joao_d_e** » Fri Jan 31, 2014 3:30 pm

Thank you.

by **Adrish33** » Sat Feb 01, 2014 3:26 am

Hi,

In WinOLS, you have to right click on the axis and select °C if you prefer...

The torque limit map is not recognised by WinOLS, you have to select it manually ;)

by **joao_d_e** » Sat Feb 01, 2014 9:43 pm

thanks, I have identified the values of the torque limiter.
But when I want to create a map ( selection/selection -> maps) winols don't let me do it (grey color).
Torque limiter location is 77D46->77D6A.

by **zok** » Sun Feb 02, 2014 12:57 am

You have to check it properly (set hexdump width to map width and use ctrl+right or ctrl+left to set it right) and press "k".

The other way is to write down the address, right click on one of the maps on the left and click "duplicate", then open it and edit its properties (map address, X/Y axes address, factors, offsets, etc).

p.s.: you edited only 5 maps. I changed 55 maps for my mondeo TDCi, and obviously still missed at least one IQ limiter.. Don't expect it to be a race car anyway. THAT's why I don't like ECM Titanium - it shows only 13 maps for my car, of which 2 are calibration maps that mustn't be edited. :roll:

by **joao_d_e** » Sun Feb 02, 2014 10:01 pm

Thaks I can select the map now.
I have a map 100% done in Winols in my car and is clutch spining.

Anyone know the location of egr maps?

by **joao_d_e** » Mon Feb 03, 2014 3:51 am

EGR-> 61E3E ?

by **zok** » Wed Feb 05, 2014 10:26 am

Switch Hexdump window to 8-bit mode, numeric view (0-255), and go to address 6111F; set it from 001 to 000.

You can see the sequence:
001 000 000 000 001 000 001 000 001 048

It should be:
000 000 000 000 001 000 001 000 001 048

Try it (flash the modified dump, start the engine and check if there is still vacuum on the EGR vacuum hose) and report back! ;)

678CA, 6792E, 7789CA and 7792E are well-known-to-be-missed IQ/Temperature limiters.

by **zok** » Wed Feb 05, 2014 10:33 am

joao_d_e wrote:EGR-> 61E3E ?

61E3E and 71E3E should be EGR maps.

I am not 100% sure because I don't know how exactly should a 2.0 HDi EGR map look, but whatever is named "phase of injection" in ECM Titanium, is always an EGR map. :)

by **joao_d_e** » Thu Feb 06, 2014 5:02 pm

here is maps I found if anyone want some help

If have any error report please.

http://tinypic.com/view.php?pic=5oea0h&s=8#.UvOi3_l_tqV

I don´t found injection advance maps