Pug 306 HDI rhy 90bhp

by **booster103** » Fri Jan 03, 2014 7:59 am

Bonjour, j'ai remap ma voiture et je sens qu'elle est bridé car le gain en performance est très léger. Je suis également limité en vitesse maximal. :(

Mes outils de travails sont WinOLS et ECM.

Ma Première question est: si je retrouve les adresse des cartes à l'aide à l'aide de WinOLS, une fois repérés, pourrai je les recréer sur ECM? :?:

by **booster103** » Mon Jan 06, 2014 2:24 pm

I think I have managed to disable the EGR valve with ECM using Hex window, I used the decimal mode and I replaced the "01" to "00" addresses $ 061115 and $ 071115. Did I do well?

Sorry for my bad English skills ...

by **booster103** » Mon Jan 06, 2014 2:31 pm

booster103 wrote:Bonjour, j'ai remap ma voiture et je sens qu'elle est bridé car le gain en performance est très léger. Je suis également limité en vitesse maximal. :(

Mes outils de travails sont WinOLS et ECM.

Ma Première question est: si je retrouve les adresse des cartes à l'aide à l'aide de WinOLS, une fois repérés, pourrai je les recréer sur ECM? :?:

Hello, I remap my car and I feel it is clamped because the performance gain is very light. I am also limited maximum speed. : (

My work tools are WinOLS and ECM.

My first question is: if I find the address cards with using WinOLS, once identified, will I be able to recreate on ECM? :?:

by **abc-tuning** » Mon Jan 06, 2014 3:43 pm

We cannot help you without your ori and tuned file

Maybe you forgot IQ limiters and you didnt gain yours requested power

by **booster103** » Thu Jan 09, 2014 3:26 pm

booster103 wrote:
306 hdi ori 910.zip

by **booster103** » Fri Jan 10, 2014 12:13 am

sorry.

by **joao_d_e** » Mon Feb 03, 2014 4:23 am

IQ limiter (water and oil one's) aren't change in usual ECM drivers, you can't achive a lot of power without chage it.

by **joao_d_e** » Mon Feb 03, 2014 4:28 am

I think you can change the values of phase of injection to desactivate egr in ECM.

by **booster103** » Mon Feb 10, 2014 8:32 pm

joao_d_e wrote:I think you can change the values of phase of injection to desactivate egr in ECM.

Thank you for your help.

I made some changes to some maps it based on a file already changed, but I do not know how to spot the SVBL and SVRPL.
And also, I do not know how the checksums are recalculated ... You can recommend?

by **joao_d_e** » Tue Feb 11, 2014 4:21 am

I'm just a beginer but I change values on winols and after I use a checksum corrector.

checksum-corrector-t1227?hilit=checksum%20corrector

About SVBL, I think isn't necessary change it, your turbo have wastegate, only mechanical control.