No reply from ecu EDC16U34 moded file

by **Silvach** » Wed Mar 05, 2014 8:21 pm

Hy guys,

I just wanted to chiptune friend car and when i put the moded map to the car mpps says that some "condition" is wrong. Map is 100% uploaded.
Then i put the original map on and ECU wakes up...

Tried to change only one number and i changed SVBL from 2350mbar to 2450mbar. Went uploading the map only with this change and again same problem...
I used winols2.24.

Really don't know what 2 do.

Can some 1 help please.
Maybe ECU i some kind locked from being chiped???
:cry:

Car is Golf mk5 1.9tdi pd 105ps EDC16U34 ecu

by **adriancl** » Thu Mar 06, 2014 7:40 am

Hi m8,
Checksum wrong.

by **Silvach** » Thu Mar 06, 2014 2:31 pm

Yesterday i again go to winols and fined that he didn't do checksum automatically so i did it by confirming it... Ill try today again upload the map...

One question,
I changed torque, svbl, boost limiter, boost map, smoke map.
Do i have to change the nm to mg map to?

by **Silvach** » Thu Mar 06, 2014 7:20 pm

Checksum done with winols 2.24 and map stil doesn't work. Mpps says Contidions not right.

I dont know what 2 do next.
Some one has an idea?

by **fodortms** » Thu Mar 06, 2014 10:57 pm

Try rewrite via BDM port!
100% work, but not with mpps
br

by **adriancl** » Fri Mar 07, 2014 7:29 am

Hi m8,
I had the same problem last week.But I read the original file twice .Between two readings there was a difference.First read was bad(while reading I don't have stopped all consumers, radio, etc).Secont read was made later with all consumers stoped,Second original file was good. I rewrote the ori file with MPPS in slow mode but before that I disconnected the battery for several minutes and I shorted the battery terminals.It worked perfectly.
Try to find a good original file for your ECU and see if your original read is good or bad.
Can taste also your ori file with ECM Titanium.If it's a good reading than ECM will show you the driver.If not, you have a bad read m8.

by **Silvach** » Fri Mar 07, 2014 8:28 am

Don't have knowledge abd equipment to do that...
I don't understand how original map i can rewrite but moded map don't....

Can u test it pleas? I can upload both original and moded file here.