galaxy edc15p cant read flash

by **Homiczek** » Sat Apr 05, 2014 4:49 pm

Hi

I tried to read bin from galaxy 2004 038906019LR 0281011143 115hp by mpps, and i couldnt do it.

it started to read, and about 20-30 % big red error and stop. I tried to use slow speed bu te same error

This ecu has logo AE or something like this, becouse this is ford..

maybe any electical need ?? plug out some fuse etc ??

aby sugestions to read this, and then safely write ??

by **Auditune** » Sat Apr 05, 2014 6:28 pm

Homiczek wrote:Hi

I tried to read bin from galaxy 2004 038906019LR 0281011143 115hp by mpps, and i couldnt do it.

it started to read, and about 20-30 % big red error and stop. I tried to use slow speed bu te same error

This ecu has logo AE or something like this, becouse this is ford..

maybe any electical need ?? plug out some fuse etc ??

aby sugestions to read this, and then safely write ??

Sometimes you may have to pull dash fuse

by **sneikas** » Sat Apr 05, 2014 7:18 pm

For me fuses never help, I prefer direct connection to ECU.

by **siewcu** » Sun Apr 06, 2014 5:55 pm

Try with fuses, but if it's cloned MPPS it has a lot of problems with EDC15 - so try with other hardware or something...

by **chli1976** » Sun Apr 06, 2014 8:31 pm

it should work on desk

by **Homiczek** » Mon Apr 07, 2014 1:20 pm

sneikas wrote:For me fuses never help, I prefer direct connection to ECU.

direct mean ecu on desk and by OBD ?

I have ecu - obd interface with k, l, can, +,-, ignition lines

by **sneikas** » Mon Apr 07, 2014 4:34 pm

Homiczek wrote:
sneikas wrote:For me fuses never help, I prefer direct connection to ECU.

direct mean ecu on desk and by OBD ?

I have ecu - obd interface with k, l, can, +,-, ignition lines

You need a cable lik this http://www.chiptuners.org/images/gal009.jpg, i made it myselft. OR you can do it with wires http://wiki.obdtuning.com/images/c/cb/V ... P_P%2B.jpg

by **Homiczek** » Tue Apr 08, 2014 11:19 am

sneikas wrote:
Homiczek wrote:
sneikas wrote:For me fuses never help, I prefer direct connection to ECU.

direct mean ecu on desk and by OBD ?

I have ecu - obd interface with k, l, can, +,-, ignition lines

You need a cable lik this http://www.chiptuners.org/images/gal009.jpg, i made it myselft. OR you can do it with wires http://wiki.obdtuning.com/images/c/cb/V ... P_P%2B.jpg

I have it :)