hi everyone!

After reading some of threads here in the forum, some time of research I decided to buy a FGTech Galletto 2. but this interface does not read or written by the OBD port on EDC16 ECUs, must be by BDM, what happens is I have a bit of fear of making the connection for BDM, they still have not bought the BDM Frame support.

My question is: mpps, or galletto 1260 are reliable to read and write in EDC16? Because soon I will buy a Peugeot 207 1.4 hdi and wanted to remap without having to open the ECU and make access by BDM, wanted to remap for OBD port.

Anyone have knowledge on these interfaces?

Thank you!

paulo_ribeiro wrote:I decided to buy a FGTech Galletto 2. but this interface does not read or written by the OBD port on EDC16 ECUs, must be by BDM

This is only the case for EDC15C34 when using cloned galletto 2.

I have them all - galletto 1260, MPPS and Galletto 2, and I always use Galletto 2.

thanks for reply.

but you have the clone interfaces? or all of them are original?

Which is the best flashing tool to buy?
Kess v2 or Galleto v54

Wanted to reflash Alpha 166 2,4 EDC 15C5, but no such MPPS ECU. There are only 15C7. I chose 15C7 downloaded firmware. And trying to load MPPS swears wrong. How to do it right?

andthe wrote:Which is the best flashing tool to buy?
Kess v2 or Galleto v54

Hi, would depend on how u want to use the tool if you want to read/write via obd port then is best to go for kess v2 as this covers a lot more cars through the obd and the v54 dont, but is probley better for on the bench tunning

Deman wrote:Wanted to reflash Alpha 166 2,4 EDC 15C5, but no such MPPS ECU. There are only 15C7. I chose 15C7 downloaded firmware. And trying to load MPPS swears wrong. How to do it right?

sorry but i never use mpps. wait for someone to help.