Hi there,
i have problem with old transit gasoline. Owner lost all keys. Then locksmith man trying to manual input new key in TMS370 (it was desoldered/soldered) and now pats LED counting error code 32 - no communication with ecu. Problem is that i don't know is this original dump from TMS or locksmith is made changes (not only add key)
tnasponder is texas 4c and data from it is 90 B9 38 02.
Ecu- 98VB-12A650-FB
pats- 97AP-19A366-AA
any idea?
tnx

hi friend remuve tms chip and coneckt pin 4 to pin 13 and should be ok
Regards

Plug programmer to OBD and use option erase PATS. This should reset what ever locksmith has done. Then you will need to cycle 3 chips. :) obd on these some times hidden in fuse box under a spare fuse cover. Good luck.

Thanks for help.
I don't have diagnostic like ford vcm. With short pins starter crank but no start. Now with small changes in dump starter also crank but fuel pump and injectors not work (there is no impulses on injector). I have autocom diagnostic and i can run selftest. In selftest fuel pump work.
Do you have any dump for tms. I want to try.

I've tried PATS function with licensed IDS on 2 x 90's Transit and no joy on either. Has anyone had success with another tool ?

t300,mvp??